
The AirTAC GFC600-25 Combination Unit (GFC60025MC1T) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1" ports, a 40 µm element, a manual drain and regulation over 0.05 - 0.9 MPa (7 - 130 psi).
The AirTAC GFC series is a two-unit compressed-air treatment set: a filter regulator paired with a separate lubricator, so one station removes water and particulate, sets downstream pressure and adds oil mist. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Both bowls are aluminium alloy at size 600. With the manual drain the regulator setting range is 0.05-0.9 MPa (7-130 psi), maximum inlet pressure is 1.0 MPa (145 psi), and the operating temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GFC family is available in sizes 200, 300, 400 and 600 with ports from 1/8 to 1 inch, 40 um or 5 um filtration, differential-pressure, automatic or manual drains, MPa, psi or bar gauge scales in square or round style, and a check-valve option. Flow is published as curves rather than a single rating, so we confirm datasheet figures on request. Order code GFC60025MC1T has NPT ports (the T in the code) for North American pipe fittings.
| Model | AirTAC GFC600-25 Combination Unit (GFC60025MC1T) |
|---|---|
| Series | GFC600 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFC600 | G-series two-unit set, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR600-25 filter regulator and GL600-25 lubricator.
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC600 · PT1" · 40 µm |
|---|---|
| One size down | GFC400 |
| Three-unit equivalent | GC600-25 |
| Build order | Filter regulator first, lubricator last |
A plant maintenance shop drawing air for impact guns, ratchets and blow guns from a 1 inch compressor take-off uses this set as its preparation point; the manual drain suits a station an attendant opens at the start of each shift.
Heavy-vehicle service bays run impact wrenches, tire cages and lift cylinders off shop air. The two-unit set at the bay drop keeps that air filtered, regulated and oiled, and the round MPa gauge gives a clear reading at the point of use.
A steel-fabrication shop feeding grinders, drills and clamping fixtures from a 1 inch header drop uses this set for tool air; the 40 um element handles mill-scale carry-over from the main and the wide 0.05-0.9 MPa manual-drain setting range covers low- and high-torque tools alike.
The M in this code selects the manual drain: an operator opens the drain when wanted, which suits points that are visited regularly or where unattended draining is not desired. Note the manual-drain regulator range of 0.05-0.9 MPa (7-130 psi); the differential-pressure and automatic drain versions start at 0.15 MPa. Filtration is the 40 um standard grade - the 5 um W element is the finer option. The external round gauge reads in MPa; psi or bar scales and the embedded square gauge are alternatives. Size 600 with a 1 inch NPT port is the largest GFC step; This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowls on the GFC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR600-25 filter regulator on its own.
We do not quote a single rated flow because AirTAC publishes G-series flow as curves rather than one rated figure. Send your operating pressure, port size and demand and we will confirm the correct sizing from the datasheet on request.
The M code means the drain is opened by hand when you choose, which suits attended stations and keeps the regulator range at 0.05-0.9 MPa (7-130 psi). The differential-pressure drain (the default, blank code) and the A automatic drain work unattended, with a 0.15-0.9 MPa (20-130 psi) setting range on those versions.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.