verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GFC600 · Two-Unit Set (filter regulator + lubricator)

AirTAC GFC600-25 Combination Unit (GFC60025MC1WTK)

The AirTAC GFC600-25 Combination Unit (GFC60025MC1WTK) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1" ports, a 5 µm element, a manual drain and regulation over 0.05 - 0.9 MPa (7 - 130 psi).

  • TypeTwo-unit set (F.R. + L.)
  • Port sizePT1"
  • Regulating range0.05 - 0.9 MPa (7 - 130 psi)
  • Filtering grade5 µm
  • DrainManual drain
  • Bowl materialAluminium alloy
  • Pressure gaugeFitted
  • ThreadNPT
$211.94 $219.44Save 3% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GFC600-25 drain, gauge and thread option on one page All GFC600-25 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the AirTAC GFC600-25 Combination Unit (GFC60025MC1WTK)

The AirTAC GFC series is a two-piece air preparation set: a filter-regulator plus a lubricator, paired to filter, regulate and oil-mist-lubricate compressed air at one station. This GFC60025MC1WTK is the 600 size with NPT 1 inch ports, a manual drain on the filter-regulator bowl, a 5 um (W) filter element, an external round pressure gauge scaled in MPa, and a reverse (check) valve fitted. In service, the manual drain means an operator opens the bowl drain by hand, the 5 um element gives cleaner supply air to sensitive equipment, and the check valve helps hold downstream pressure if the upstream supply is interrupted.

This is a genuine AirTAC part. The G series spans 200, 300, 400 and 600 sizes with ports from 1/8 to 1 inch, three thread types (NPT on this code), differential-pressure, automatic or manual drains, 40 um standard or 5 um (W) filtration, and gauges in MPa, psi or bar scales. Maximum working pressure is 1.0 MPa (145 psi) and the operating temperature range is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rating, so we confirm datasheet and flow figures for your application on request.

AirTAC GFC600-25 Combination Unit (GFC60025MC1WTK) Technical Specifications

ModelAirTAC GFC600-25 Combination Unit (GFC60025MC1WTK)
SeriesGFC600 two-unit set
CompositionFilter regulator + lubricator (2 units)
Port sizePT1" (NPT thread)
Filtering grade5 µm
Regulating range0.05 - 0.9 MPa (7 - 130 psi)
Pressure typeStandard type
FluidCompressed air
Max. working pressure1.0 MPa (145 psi)
Temperature range-5 to +70 °C (unfreeze)
Drain typeManual drain
Bowl materialAluminium alloy
Pressure gaugeFitted — round, MPa scale
Reflux valveFitted (reverse flow permitted)

Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.

Model Code: AirTAC GFC600-25 Combination Unit (GFC60025MC1WTK)

GFC600G-series two-unit set, 600 body — sets the port range.
25Port size PT1". This body offers 20 = PT3/4", 25 = PT1".
MDrain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)).
(blank)Standard type. Blank is standard, L is the low-pressure type.
(blank)Pressure gauge fitted (blank).
CGauge shape: Round. C is round, F is square.
1Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar.
WFiltering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist.
TNPT thread. PT is the default; G is BSPP and T is NPT.
KReverse-flow (reflux) valve fitted.

Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR600-25 filter regulator and GL600-25 lubricator.

Size Class & How It Differs From GC

  • GFC200PT1/8" - PT1/4"
  • GFC300PT1/4" - PT1/2"
  • GFC400PT3/8" - PT1/2"
  • GFC600PT3/4" - PT1"

A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.

This modelGFC600 · PT1" · 5 µm
One size downGFC400
Three-unit equivalentGC600-25
Build orderFilter regulator first, lubricator last

Where the AirTAC GFC600-25 Combination Unit (GFC60025MC1WTK) Is Used

valve

Water-treatment actuated valve bank

On the air header feeding actuated butterfly and knife-gate valves at a treatment plant, the 5 um element protects positioner-grade pilots and the check valve holds the bank through supply dips.

science

Pneumatic test bench in a QA lab

Supplying a leak- and pressure-test bench, the regulated, finely filtered and lubrication-free-at-point-of-test air feed keeps gauge readings consistent, with the MPa round gauge read directly at the set.

factory

Textile-machine actuation supply

Feeding the doffing and jet-pipe actuators on a spinning line, the two-unit set conditions the 1 inch drop, and the check valve keeps the machine circuits charged during brief upstream interruptions.

Is the AirTAC GFC600-25 Combination Unit (GFC60025MC1WTK) the Right Set?

Take the 600 size with 1 inch ports where a main air drop serves high-consumption equipment; step down to 400, 300 or 200 only where the flow curve allows. The W suffix selects the 5 um element over the 40 um standard for finer particulate protection, and the K suffix adds a reverse (check) valve for installations where an upstream interruption must not dump downstream pressure. The drain code M means manual bowl drainage - order an automatic-drain version if the plant runs unattended. The regulator on a manual-drain set adjusts from 0.05 to 0.9 MPa (7-130 psi), and the C1 round gauge reads in MPa (psi and bar scales are alternatives). NPT is the thread on this model; G (BSPP) and NPT are orderable. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.

Quick checklist

  • ✓ Body size for your peak flow (PT1" here)
  • ✓ Element 40 µm or 5 µm
  • ✓ Drain sets the regulating band
  • ✓ Gauge fitted, shape and scale
  • ✓ Two-unit (GFC) or three-unit (GC) layout
  • ✓ Oil mist acceptable downstream
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter regulator first, lubricator last.
  • check Mount vertically, bowls down.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
  • check Drain condensate before the bowl fills; check the oil level.
  • check Keep the set above freezing (-5 to +70 °C, unfreeze).

The aluminium-alloy bowls on the GFC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR600-25 filter regulator on its own.

AirTAC GFC600-25 Combination Unit (GFC60025MC1WTK) FAQ

Flow for the G series is published as curves, not as one rated number, so we do not state a figure here. Tell us your working pressure and downstream demand and we will confirm the flow figures from the datasheet on request before you order.

W selects the 5 um filter element instead of the 40 um standard, and K fits a reverse (check) valve so air does not flow back if the upstream supply drops. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for AirTAC GFC600-25 Combination Unit (GFC60025MC1WTK)

Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GFC60025MC1WTK and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.