
The AirTAC GFC600-25 Combination Unit (GFC60025MC3T) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1" ports, a 40 µm element, a manual drain and regulation over 0.05 - 0.9 MPa (7 - 130 psi).
The AirTAC GFC60025MC3T is a two-unit air preparation set: a filter-regulator paired with a lubricator, so compressed air is filtered, regulated and oiled in one coordinated order. This 600-size unit uses 1 in NPT (JIS) ports and carries manual-drain bowls in aluminium alloy at this size. The regulator adjusts from 0.05 to 0.9 MPa (7-130 psi) with this manual-drain configuration, and the code specifies an external round pressure gauge with a bar scale. Filtration is the standard 40 um element.
This is a genuine AirTAC part supplied by airtacdistr.com for the US market. The GFC two-unit family is also offered in 200, 300 and 400 sizes, with automatic, manual or differential-pressure drains, 40 um or 5 um (W) filter grades, embedded square or external round gauges in MPa, psi or bar scales, and G (BSPP) or NPT threads as catalogue options. AirTAC publishes flow as curves rather than a single rated figure, so ask us to confirm sizing and the full datasheet for your application.
| Model | AirTAC GFC600-25 Combination Unit (GFC60025MC3T) |
|---|---|
| Series | GFC600 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — round, bar scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFC600 | G-series two-unit set, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 3 | Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR600-25 filter regulator and GL600-25 lubricator.
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC600 · PT1" · 40 µm |
|---|---|
| One size down | GFC400 |
| Three-unit equivalent | GC600-25 |
| Build order | Filter regulator first, lubricator last |
A mechancial press shop running air cylinders on its stamping line uses this 1 in two-unit set to deliver clean, pressure-stabilised and lubricated air to the press actuators, with operators topping up oil and draining the bowls during scheduled checks.
On a high-throughput bottling hall, this set conditions the main air feed to conveyor stops, lifters and capper cylinders, protecting downstream valves from water and particulate while keeping a steady mist of oil in the actuator air.
A weaving mill supplying a bank of air-jet looms fits this 600-size set on the loom air line, where the 40 um filter guards the jet nozzles and the lubricator feeds the machine's pneumatic requirements from one conditioning point.
Size by port and demand: 600 with 1 in NPT ports sits at the top of the GFC range, while 200, 300 and 400 step down in port size and capacity. Drain type is a real choice: this code takes manual drains, which also widens the regulator adjustment range to 0.05-0.9 MPa (7-130 psi); automatic (A) and differential-pressure (default) drains suit installations you cannot walk up to regularly. The filter grade here is the standard 40 um element; specify W for the 5 um option. The gauge on this code is an external round type with bar scale; embedded square gauges in MPa, psi or bar scales are the alternative. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowls on the GFC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR600-25 filter regulator on its own.
AirTAC publishes flow for this series as curves rather than a single rated figure, so there is no one number we can honestly quote. Send us your line pressure, port size and expected demand, and we will confirm the sizing from the datasheet on request before you order.
The C and 3 in the model code specify an external round pressure gauge with a bar scale. The alternative is the embedded square gauge, available in MPa, psi or bar scales, so you can match the readout your operators already work with.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.