
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL20X100-CAT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 100mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL20X100-CAT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. Delivering 157 N of push force and 132 N of pull force at 0.5 MPa, this 20 mm bore, 100 mm stroke unit is built for light-duty cycling. The CA pivot back cover allows the body to swing on a pin, making it ideal for arcing or angular load applications where a rigid flat-end mount would bind.
Unlike tie-rod bodies that can be unbolted and rebuilt, the MBL uses a riveted rolling-packed aluminum barrel that crimps the front and rear covers directly to the tube for minimal weight. End-of-stroke energy is absorbed by a fixed rubber bumper rather than an adjustable cushion. Note that because this SKU lacks the -S suffix, it has no internal magnet and cannot accept a CMSG, DMSG, or EMSG position sensor. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL20X100-CAT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø20 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | — |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 20 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Leverages the CA pivot back cover to swing a small gripper in a 100 mm arc, transferring electronic components between conveyor belts without binding.
Uses the 157 N push force at 0.5 MPa to push cardboard packaging flaps clear of a sealing head in confined wrapping machinery.
Cycles a 100 mm stroke to open and close a pneumatic testing gate on a circuit board assembly line, fitting easily into the machine's narrow frame.
For sizing context, stepping down is not an option as 20 mm is the smallest MBL bore. Stepping up to the 25 mm bore raises the 0.5 MPa push force to 245 N if your application needs more muscle. If you require adjustable end-of-stroke cushioning for heavier moving masses, select the MBLC variant instead of this base MBL. For single-acting push or pull operations within 20-40 mm bores, look at the MSBL or MTBL series.
This CA pivot configuration is specified for swinging arc motions, but be aware the 8 mm piston rod has low side-load tolerance. Even with the pivot mount, a 100 mm stroke on a mini cylinder can induce rod-bearing bending under lateral forces. If the load cannot be kept perfectly linear, guide it externally or consider the MBLD double-rod anti-rotation type. This cylinder will drift and drop its load if air pressure is lost or exhausted, as the fixed rubber bumper softens impact but provides no braking or position holding function.
Quick checklist
At 0.5 MPa, this 20 mm bore cylinder provides 157 N of push force and 132 N of pull force. Increasing the supply pressure to 0.7 MPa raises the push force to 220 N. The maximum theoretical force is 32 kgf at 1.0 MPa.
No. The base MBL20X100-CAT uses a fixed rubber bumper to soften end-of-stroke impact; it does not have an adjustable air cushion (you would need the MBLC variant for that). Additionally, because this SKU lacks the -S suffix, it has no internal magnet and cannot be fitted with a CMSG, DMSG, or EMSG sensor switch.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.