
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL20X100SCAT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 100mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL20X100SCAT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces where larger units cannot fit. Delivering 157 N of push force and 132 N of pull force at 0.5 MPa, this 20 mm bore model is tailored for light-duty arcing and angular load applications. The 100 mm stroke provides ample travel for small-part ejection or gating tasks.
This specific SKU features a CA pivot (clevis) back cover that swings on a pin to accommodate angular misalignment, paired with a built-in -S magnet for CMSG, DMSG, or EMSG sensor switches to track rod position. Unlike tie-rod cylinders that can be disassembled, the MBL body uses a riveted rolling-packed aluminum barrel that is permanently crimped for a lightweight, space-saving footprint. The carbon-steel piston rod is hard-chrome plated to 20 um for wear and corrosion resistance, while a heterogeneous two-way piston seal retains grease for a long service life. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL20X100SCAT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø20 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | — |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 20 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Uses the 100 mm stroke and CA clevis to swing a cutting blade into position, absorbing angular stress while routing populated circuit boards with 157 N of push force.
Pivots a lightweight sorting flap on a packaging conveyor; the -S magnet triggers a DMSG solid-state switch to confirm the gate has fully opened before cartons pass.
Mounts via the clevis pin to shake a small hopper wall and prevent powder bridging, relying on the 220 N push force at 0.7 MPa to break material jams.
When sizing this 20 mm bore actuator, consider stepping down to a smaller mini cylinder if your load is extremely light, or stepping up to the 25 mm bore—which yields 245 N of push force at 0.5 MPa—for heavier positioning tasks. The CA pivot back cover on this unit is ideal for mechanisms that swing or experience side loads, but if you need adjustable end-of-stroke cushioning for faster cycling, upgrade to the MBLC variant.
Note that the base MBL uses a fixed rubber bumper to soften end-of-stroke impacts; it does not hold the load if air pressure is lost, so add an external rod lock or pilot-operated check valve for fail-safe positioning. This configuration includes a G1/8 port, an M8x1.25 rod-end thread, a NPT tapered port thread, and the -S magnet. Because the 100 mm stroke is relatively long for an 8 mm rod, use an external guide rail to prevent rod-bearing bending under side loads.
Quick checklist
At 0.5 MPa it provides 157 N push and 132 N pull. At 0.7 MPa the push force is 220 N. The maximum theoretical force is 32 kgf at 1.0 MPa, with a proof pressure of 1.5 MPa.
No, the base MBL uses a fixed rubber bumper to soften end-of-stroke impacts, not an adjustable air cushion (you would need the MBLC variant for that). Furthermore, it cannot hold a load without live air pressure; you must use an external rod lock for fail-safe holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.