verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC MBL Series · Aluminum-Barrel Mini Cylinder

Airtac MBL Aluminum Alloy Mini Cylinder MBL20X100SUT

The AirTAC MBL Aluminum Alloy Mini Cylinder MBL20X100SUT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 100mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.

  • BoreØ20 mm
  • Stroke100 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM8×1.25
  • CushionRubber bumper (MBLC variant: adjustable air cushion)
$32.34 $39.84Save 18% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MBL20 stroke, mounting and version on one page All MBL20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MBL Aluminum Alloy Mini Cylinder MBL20X100SUT

The AirTAC MBL20X100SUT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. It features a 20mm bore and 100mm stroke, generating 157 N of push force and 132 N of pull force at 0.5 MPa. The U-type flat-end back cover provides a rigid, fixed rear mounting face for straightforward in-line placement. Because this SKU includes the -S suffix, it has a built-in magnet for non-contact position detection using AirTAC CMSG (reed), DMSG, or EMSG (solid-state) sensor switches.

Unlike ISO 6432 stainless steel bodies, this unit utilizes a riveted rolling-packed aluminum barrel that crimps the front and rear covers to the tube, prioritizing a light footprint over field-rebuildability. Internal longevity is ensured by a heterogeneous two-way piston seal that actively retains grease, while the 8mm carbon-steel piston rod features 20 µm hard-chrome plating to resist wear and corrosion. The base MBL relies on a fixed rubber bumper to soften end-of-stroke impact rather than an adjustable cushion screw. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac MBL Aluminum Alloy Mini Cylinder MBL20X100SUT Technical Specifications

ModelAirtac MBL Aluminum Alloy Mini Cylinder MBL20X100SUT
SeriesMBL aluminum-barrel mini round cylinder
Bore sizeØ20 mm
Stroke100 mm
Acting typeDouble acting
Port size1/8"
Rod threadM8×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionRubber bumper (MBLC variant: adjustable air cushion)
Max strokeUp to 500 mm

Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa157 N132 N
0.7 MPa220 N—
Max (@1.0 MPa)32 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MBL Aluminum Alloy Mini Cylinder MBL20X100SUT

MBLAluminum-barrel mini round cylinder, double acting.
20Bore size in mm.
×100Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).

Where the Airtac MBL Aluminum Alloy Mini Cylinder MBL20X100SUT Is Used

memory

PCB Router Ejection

Pushes singulated printed circuit boards out of a routing machine with 157 N of force, using the built-in -S magnet to confirm ejection with a DMSG sensor.

inventory_2

Carton Flap Folding

Folds small packaging flaps on a compact carton sealer where the 100mm stroke and lightweight riveted aluminum body minimize machine envelope.

biotech

Microplate Handling

Positions a 96-well microplate carrier in a lab analyzer, relying on the U flat-end back cover for rigid mounting and the 8mm chrome-plated rod for smooth motion.

Is the Airtac MBL Aluminum Alloy Mini Cylinder MBL20X100SUT the Right Cylinder?

If your application requires less extension, stepping down to the 20mm bore with a 50mm stroke preserves the same 157 N push force in a shorter body. If you need higher force, the next size up is the 32mm bore, which outputs 402 N at 0.5 MPa. For faster cycle speeds or heavier moving masses at this 100mm stroke, consider the MBLC variant, which replaces the fixed rubber bumper with an adjustable air cushion. To actuate a clamp without continuous live air pressure, use the single-acting MSBL push cylinder.

This MBL20X100SUT configuration specifies a NPT tapered port thread, a G1/8 port size, an M8x1.25 rod-end thread, and a rigid U flat-end back cover. Because it lacks a mechanical lock, the rod will drift or drop if air pressure is lost or the valve is centered; an external pilot-operated check valve is required to hold suspended loads. For this 100mm stroke, the 8mm rod handles standard loads well, but for any stroke of 300mm or more, the small rod diameter demands an external guide, a CA pivot back cover, or the MBLD double-rod type to prevent bending under side load.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB / FA / SDB) and back cover (CA pivot / U flat-end).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MBL Aluminum Alloy Mini Cylinder MBL20X100SUT FAQ

This 20mm bore cylinder delivers 157 N push and 132 N pull at 0.5 MPa, 220 N push at 0.7 MPa, and a maximum theoretical force of 32 kgf at 1.0 MPa. It operates at a speed range of 30-800 mm/s.

No, the base MBL20X100SUT uses a fixed rubber bumper to absorb end-of-stroke impact. If your application requires adjustable cushioning for heavier loads, you must use the MBLC variant.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MBL Cylinders

Request a Quote for Airtac MBL Aluminum Alloy Mini Cylinder MBL20X100SUT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MBL20X100SUT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.