
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL20X10CAT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 10mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL20X10CAT is a compact double-acting aluminum mini round cylinder engineered for exceptionally tight machine spaces. Operating at 0.5 MPa, it generates 157 N of push force and 132 N of pull force across its 10 mm stroke, making it ideal for short, precise positioning tasks. The riveted rolling-packed barrel crimps the front and back covers directly to the tube, yielding a lightweight body that is not designed to be disassembled or rebuilt like a traditional tie-rod cylinder.
This specific SKU features a CA pivot (clevis) back cover, allowing the cylinder to swing freely on a pin to accommodate arcing or angular loads. Because this configuration lacks the -S suffix for a built-in magnet, it cannot accept a CMSG, DMSG, or EMSG sensor switch for rod position detection. The Ø8 mm carbon steel piston rod is hardened with 20 µm chrome plating for superior wear and corrosion resistance, while the internal heterogeneous two-way piston seal retains grease for a long service life. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL20X10CAT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø20 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | — |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 20 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Provides the exact 157 N push force needed to pop delicate printed circuit boards out of testing fixtures without damaging components.
The CA pivot bracket absorbs angular misalignment while the 10 mm stroke rapidly diverts tiny electronic resistors down the correct conveyor lane.
Swings thin packaging dust covers open and closed on compact filling machines where a larger cylinder would consume too much mounting space.
Select the MBL20X10CAT when your mechanism requires a short 10 mm stroke and a rear pivot mount. If your application needs even less force, step down is not an option as 20 mm is the smallest available bore. If you need more power, step up to the 25 mm bore, which provides 245 N of push force at 0.5 MPa. Keep in mind the base MBL uses a fixed rubber bumper to soften end-of-stroke impact; for adjustable air cushioning, specify the MBLC variant. Furthermore, this cylinder does not hold its position if air pressure is lost or the valve is centered—the rod will drift. Use an external pilot-operated check valve if load holding is required. Replacement matching: 20 mm bore, 10 mm stroke, G1/8 port, NPT thread, CA back cover, no magnet.
Quick checklist
At 0.5 MPa, this 20 mm bore cylinder outputs 157 N of push force and 132 N of pull force. At 0.7 MPa, the push force increases to 220 N, with a theoretical maximum of 32 kgf at 1.0 MPa. The operational speed ranges from 30-800 mm/s.
No. Because this SKU lacks the -S suffix, it has no internal magnet and cannot accept CMSG, DMSG, or EMSG sensor switches. Additionally, the base MBL uses a fixed rubber bumper for end-of-stroke damping; you must upgrade to the MBLC variant to get adjustable air cushioning.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.