verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart1 Request a QuoteQuote
AirTAC MBL Series · Aluminum-Barrel Mini Cylinder

Airtac MBL Aluminum Alloy Mini Cylinder MBL20X10SCAT

The AirTAC MBL Aluminum Alloy Mini Cylinder MBL20X10SCAT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 10mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.

  • BoreØ20 mm
  • Stroke10 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM8×1.25
  • CushionRubber bumper (MBLC variant: adjustable air cushion)
$29.32 $36.82Save 20% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MBL20 stroke, mounting and version on one page All MBL20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MBL Aluminum Alloy Mini Cylinder MBL20X10SCAT

The AirTAC MBL20X10SCAT is a compact double-acting aluminum mini round cylinder engineered for exceptionally tight machine spaces. With a 20mm bore and a short 10mm stroke, it provides 157N of push force and 132N of pull force at 0.5MPa. The riveted rolling-packed barrel crimps the front and rear covers directly to the tube, yielding a lightweight body that is not designed to be disassembled or rebuilt like a standard tie-rod cylinder.

This specific SKU includes a CA pivot back cover, allowing the cylinder to swing on a pin to accommodate arcing or angular loads, rather than being rigidly fixed. The integrated -S magnet enables position detection using AirTAC CMSG reed or DMSG/EMSG electronic sensor switches. Internally, a heterogeneous two-way piston seal retains grease for long service life, while the carbon steel rod features 20um hard-chrome plating for wear and corrosion resistance. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac MBL Aluminum Alloy Mini Cylinder MBL20X10SCAT Technical Specifications

ModelAirtac MBL Aluminum Alloy Mini Cylinder MBL20X10SCAT
SeriesMBL aluminum-barrel mini round cylinder
Bore sizeØ20 mm
Stroke10 mm
Acting typeDouble acting
Port size1/8"
Rod threadM8×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionRubber bumper (MBLC variant: adjustable air cushion)
Max strokeUp to 500 mm

Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa157 N132 N
0.7 MPa220 N—
Max (@1.0 MPa)32 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MBL Aluminum Alloy Mini Cylinder MBL20X10SCAT

MBLAluminum-barrel mini round cylinder, double acting.
20Bore size in mm.
×10Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).

Where the Airtac MBL Aluminum Alloy Mini Cylinder MBL20X10SCAT Is Used

precision_manufacturing

PCB Component Populator

Uses the short 10mm stroke and 157N push force to rapidly index tiny electronic relays into sockets on a high-density assembly line without crushing the parts.

memory

Sensor Calibration Jig

Leverages the CA pivot back cover to swing a delicate optical sensor into a test fixture, absorbing angular misalignment during the clamping cycle.

inventory_2

Pharmaceutical Vial Diverter

Employs the DMSG electronic sensor to confirm rod extension, pushing lightweight glass vials onto a secondary packaging track with precise 10mm movements.

Is the Airtac MBL Aluminum Alloy Mini Cylinder MBL20X10SCAT the Right Cylinder?

Select this 20mm bore model for light-duty pivoting tasks where the 157N thrust at 0.5MPa is sufficient. If you need less force, a smaller bore option is unavailable in the MBL series; stepping up to the 25mm bore increases the push force to 245N at 0.5MPa. For applications requiring faster cycle speeds with heavier loads, consider the MBLC variant which features an adjustable air cushion instead of the base MBL's fixed rubber bumper. Note that a plain MBL does not hold its position or load when air pressure is lost or the valve is centered; the rod will drift or drop, so an external rod lock or pilot-operated check valve is required for positive holding. Replacement match: 20mm bore, 10mm stroke, G1/8 port, NPT thread, CA pivot back cover, no mounting accessory, with magnet.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB / FA / SDB) and back cover (CA pivot / U flat-end).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MBL Aluminum Alloy Mini Cylinder MBL20X10SCAT FAQ

At 0.5MPa, this double-acting cylinder provides 157N of push force and 132N of pull force. At 0.7MPa, the push force increases to 220N, with a theoretical maximum of 32kgf at 1.0MPa. The operational speed range is 30-800mm/s.

The base MBL uses a fixed rubber bumper to soften end-of-stroke impact; it is not an adjustable air cushion (for that, you need the MBLC variant). The S suffix indicates a built-in magnet, allowing you to attach CMSG, DMSG, or EMSG sensor switches for rod position detection.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MBL Cylinders

Request a Quote for Airtac MBL Aluminum Alloy Mini Cylinder MBL20X10SCAT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MBL20X10SCAT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.