
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL20X10UT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 10mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL20X10UT is a genuine double-acting aluminum mini round cylinder built for extremely tight machine spaces. With a 20mm bore and 10mm stroke, it provides 157 N of push force and 132 N of pull force at 0.5 MPa. The U flat-end back cover provides a rigid fixed rear mounting foot for stable, straight-line thrust. Because this SKU lacks the -S suffix, it has no internal magnet and cannot be fitted with a CMSG, DMSG, or EMSG position sensor switch.
Unlike tie-rod bodies that can be unbolted and rebuilt, the MBL uses a riveted rolling-packed aluminum barrel where the front and rear covers are crimped permanently to the tube. This keeps the footprint small and the weight low. The carbon-steel piston rod features 20 μm hard-chrome plating for wear resistance, and a heterogeneous two-way piston seal retains grease for long service life. End-of-stroke impact is absorbed by a fixed rubber bumper, not an adjustable cushion screw. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL20X10UT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø20 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | — |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 20 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Uses the 10mm micro-stroke and 157 N push force to eject small electronic probes from testing jigs without damaging delicate circuit board traces.
Employs the rigid U flat-end mount and short 10mm travel to deflect small packaging pouches into sealing jaws in compact wrapping machinery.
Leverages the lightweight riveted aluminum body and 132 N pull force to index sample tubes in tight laboratory automation carousels.
At 0.5 MPa, this 20mm bore generates 157 N push force. If your application needs less force, the MBL line does not offer a smaller bore, making this the most compact option available. If you need significantly more power, stepping up to the 25mm bore provides 245 N of push force at 0.5 MPa. The 10mm stroke is ideal for micro-movements; for longer travel, standard strokes go up to 500 mm.
Because the base MBL20X10UT has a fixed rubber bumper, it cannot regulate end-of-stroke speed. For faster cycling or heavier moving masses, select the MBLC variant, which features an adjustable air cushion. Note that the fixed rubber bumper only softens impact; it does not hold the load. If air pressure is lost or the valve is centered, the rod will drift and drop. Use an external pilot-operated check valve if position holding is required.
Quick checklist
The 20mm bore with an 8mm rod generates 157 N push and 132 N pull at 0.5 MPa. At 0.7 MPa, push force is 220 N. The maximum theoretical force is 32 kgf at 1.0 MPa. It uses a G1/8 port and operates at speeds of 30-800 mm/s.
No. This specific SKU lacks the -S magnet suffix, so a CMSG, DMSG, or EMSG sensor switch cannot be attached. Additionally, the base MBL uses a fixed rubber bumper to soften end-of-stroke impact; you must upgrade to the MBLC variant to get an adjustable air cushion.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.