
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL20X125SCAT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 125mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL20X125SCAT is a double-acting aluminum mini round cylinder engineered for tight machine spaces. At 0.5 MPa it provides 157 N push and 132 N pull force, making this 125 mm stroke variant well suited for mid-length actuation in compact assemblies. The riveted rolling-packed barrel permanently crimps the covers to the tube, yielding a lightweight footprint that is not designed to be disassembled like a tie-rod body.
This SKU includes a built-in magnet (-S) for tracking rod position with CMSG reed or DMSG/EMSG electronic sensor switches. It features a CA pivot back cover that swings on a pin to accommodate arcing and angular loads. The base MBL relies on a fixed rubber bumper to soften end-of-stroke impact, rather than an adjustable air cushion found on the MBLC variant. The carbon-steel piston rod has a 20 um hard-chrome plating, paired with a heterogeneous two-way piston seal that retains grease for extended operational life. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL20X125SCAT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø20 mm |
| Stroke | 125 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | — |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 20 | Bore size in mm. |
| ×125 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Drives a light routing head across a 125 mm travel path on a desktop PCB prototyping machine, using the 157 N push force to plunge the bit.
Pivots a fluid dispensing nozzle over microscope slides in a compact lab stainer, where the CA clevis allows the arm to arc smoothly.
Actuates a small vacuum gripper wrist for electronic component transfer, tracking the exact end position via a DMSG solid-state sensor.
If you need less force, step down to the neighbouring 20 mm bore's smaller alternatives or consider a different layout, but if you need more power, step up to the 25 mm bore which delivers 245 N push at 0.5 MPa. Choose the MBLC variant if your cycle speeds require an adjustable air cushion rather than the standard fixed rubber bumper. For single-direction spring-return tasks, the MSBL (push) or MTBL (pull) single-acting types cover bores 20-40.
Because this plain MBL lacks a physical lock, it cannot hold a load or maintain position if air pressure drops or the valve is centered; the rod will drift. Use an external rod lock or pilot-operated check valve for secure holding. At 125 mm stroke, the Ø8 mm rod has limited side-load tolerance, so the CA pivot back cover is essential here to prevent rod-bearing bending under angular loads. Replacement match: 20 mm bore, 125 mm stroke, G1/8 port, NPT thread, CA pivot back cover, magnet included.
Quick checklist
At 0.5 MPa it provides 157 N push and 132 N pull. At 0.7 MPa the push force is 220 N, and the maximum theoretical force is 32 kgf at 1.0 MPa. Operating pressure ranges from 0.15 to 1.0 MPa.
No, the base MBL uses a fixed rubber bumper to soften end-of-stroke impact. It is not an adjustable air cushion or a locking mechanism. If you need adjustable end-cushioning for heavier loads, select the MBLC variant.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.