
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL20X125SUT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 125mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL20X125SUT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. Operating at 0.5 MPa, it delivers 157 N of push force and 132 N of pull force over a 125 mm stroke. The riveted rolling-packed barrel crimps the front and rear covers directly to the tube, creating an exceptionally light, sealed assembly that is not designed to be disassembled or rebuilt like a heavier tie-rod cylinder.
This specific SKU includes a U flat-end back cover for rigid, fixed mounting and a built-in magnet (-S) for position detection. The internal heterogeneous two-way piston seal actively retains grease for long service life, while the Ø8 mm carbon-steel piston rod features 20 µm hard-chrome plating to resist wear and corrosion. End-of-stroke impact is absorbed by a fixed rubber bumper rather than an adjustable cushion. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL20X125SUT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø20 mm |
| Stroke | 125 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | — |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 20 | Bore size in mm. |
| ×125 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Provides 157 N of push force to eject populated printed circuit boards from test fixtures without damaging delicate solder joints.
Actuates lightweight diverter gates in vibratory bowl feeders, using the 125 mm stroke to route small screws or plastic fasteners.
Tucks minor end flaps on small pharmaceutical cartons on a high-speed packaging line where a larger cylinder would interfere with the product flow.
Select this 20 mm bore when your application requires 157 N of push force at 0.5 MPa within a compact footprint. If you need less force, there is no smaller bore in the MBL line; if you need more power, step up to the 25 mm bore which provides 245 N of push force. For higher kinetic energy at the end of this 125 mm stroke, consider the MBLC variant which features an adjustable air cushion instead of the standard fixed rubber bumper. To detect rod position, this SKU includes a magnet compatible with AirTAC CMSG (reed), DMSG, or EMSG (electronic) sensor switches. Note that a plain MBL does not hold its position if air pressure is lost or the valve is centered; use an external pilot-operated check valve if load holding is required. Replacement matching attributes: 20 mm bore, 125 mm stroke, G1/8 port, NPT thread, U flat-end back cover, no mounting accessory, with magnet.
Quick checklist
At 0.5 MPa, the push force is 157 N and the pull force is 132 N. At 0.7 MPa, the push force increases to 220 N. The maximum theoretical force is 32 kgf at 1.0 MPa.
The base MBL uses a fixed rubber bumper to soften the end-of-stroke impact. It does not have an adjustable air cushion; if your application requires adjustable end-of-stroke deceleration, you must use the MBLC variant.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.