
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL20X125UT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 125mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL20X125UT is a double-acting aluminum mini round cylinder engineered for compact installations. It delivers 157 N of push force and 132 N of pull force at 0.5 MPa, making it well-suited for moving small jigs over a 125 mm travel distance. The riveted rolling-packed barrel permanently crimps the front and rear covers to the tube, ensuring a lightweight footprint for tight machine spaces, though the body is not designed to be disassembled like a tie-rod cylinder.
This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Because this model lacks the -S suffix, it cannot accept a CMSG, DMSG, or EMSG position sensor. The base MBL relies on a fixed rubber bumper to soften end-of-stroke impacts rather than an adjustable air cushion. Inside, a heterogeneous two-way piston seal retains grease for long service life, while the Ø8 mm carbon-steel piston rod features 20 µm hard-chrome plating to resist wear and corrosion.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL20X125UT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø20 mm |
| Stroke | 125 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | — |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 20 | Bore size in mm. |
| ×125 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Pushes a depaneling router head across 125 mm to singulate populated circuit boards, utilizing the 157 N push force at 0.5 MPa without overloading the small stepper motor.
Advances a 25 mm wide pharmaceutical vial tray by 125 mm per cycle in a compact packaging machine, relying on the rigid U flat-end back cover to maintain alignment.
Lifts lightweight plastic lids off 96-well microplates using the 132 N pull force at 0.5 MPa, fitting easily into the tight vertical clearance of automated assay readers.
If you need less force, the adjacent MBL16 bore is not standard in this aluminum series, so the MBL20 is the smallest available footprint. Stepping up to the MBL25 bore increases your 0.5 MPa push force to 245 N for heavier jigs. For faster or heavier 125 mm moves that require end-speed tuning, select the MBLC variant for its adjustable air cushion instead of this fixed rubber bumper. If your process requires the rod to hold a vertical load when air pressure is removed or the valve is centered, this cylinder will drift and drop; you must add an external pilot-operated check valve or a dedicated rod lock.
With a 125 mm stroke on an Ø8 mm rod, side-load tolerance is inherently low. To prevent premature rod-bearing wear, guide the load externally or pivot the cylinder using an SDB bracket paired with a CA back cover. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
Quick checklist
At 0.5 MPa, this 20 mm bore cylinder provides 157 N push force and 132 N pull force. At 0.7 MPa, the push force increases to 220 N, with a maximum theoretical force of 32 kgf at 1.0 MPa. The operating speed ranges from 30-800 mm/s.
No. Because this SKU lacks the -S suffix, it cannot accept CMSG, DMSG, or EMSG sensor switches. Additionally, the base MBL uses a fixed rubber bumper to absorb end-of-stroke impacts. If you need adjustable end-cushioning, select the MBLC variant.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.