
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL20X150-CAT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 150mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL20X150-CAT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. It delivers a push force of 157 N and pull force of 132 N at 0.5 MPa, making the 150 mm stroke well suited for small part ejection or lightweight gating. The riveted rolling-packed barrel crimps the covers directly to the tube, yielding a light body that is not designed to be disassembled like a tie-rod unit.
This specific SKU features a CA pivot back cover that swings on a pin to accommodate arcing or angular loads. It uses a fixed rubber bumper to soften end-of-stroke impact rather than an adjustable air cushion. Because this configuration lacks the -S suffix, it cannot accept a CMSG, DMSG, or EMSG position sensor switch. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL20X150-CAT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø20 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | — |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 20 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Provides 157 N of push at 0.5 MPa to swing a small pivot gate on a PCB depaneling router, routing cut boards to the next inspection tray.
Uses the CA pivot back cover to swing a small diverter arm across a 150 mm arc, knocking rejected memory modules off a high-speed conveyor belt.
Applies 132 N of pull force to snap open minor carton flaps on a micro-packaging line, fitting easily within the machine's narrow 20 mm bore envelope.
Stepping down to the 20 mm bore from the 25 mm line drops your 0.5 MPa push force from 245 N to 157 N, while stepping up to the 32 mm bore raises it to 402 N. If your cycle requires decelerating a heavier mass at the end of the 150 mm travel, choose the MBLC variant for its adjustable air cushion. For applications needing spring return, the MSBL or MTBL single-acting types cover the 20 to 40 mm range. The base MBL does not hold its load when air pressure is lost or the valve is centered; the rod will drift, so add an external pilot-operated check valve if position holding is required. This unit features a G1/8 port, NPT thread form, an M8x1.25 rod end, and a CA pivot cover.
Quick checklist
At 0.5 MPa, this 20 mm bore cylinder provides a push force of 157 N and a pull force of 132 N. At 0.7 MPa, the push force is 220 N. The maximum theoretical force is 32 kgf at 1.0 MPa.
No, this specific SKU lacks the -S suffix, meaning it has no built-in magnet and cannot accept CMSG, DMSG, or EMSG sensor switches. You must select an MBL20X150S-CA variant if position detection is required.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.