
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL20X150SUT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 150mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL20X150SUT is a compact double-acting aluminum mini round cylinder built for tight machine spaces. In the 20 mm bore class it yields 157 N of push force and 132 N of pull force at 0.5 MPa, making this 150 mm stroke variant well suited to light-duty positioning and small-part ejection. The riveted rolling-packed barrel crimps the covers directly to the aluminum tube, yielding a lighter body that is not designed to be disassembled like a tie-rod unit.
This specific SKU features a U flat-end back cover for rigid fixed mounting and includes a built-in magnet (-S) for non-contact position detection. It pairs with AirTAC CMSG reed switches or DMSG and EMSG solid-state electronic sensors. End-of-stroke deceleration is handled by a fixed rubber bumper, which softens impact but does not lock the rod in place if air pressure is lost. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL20X150SUT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø20 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | — |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 20 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Provides the 157 N of push force at 0.5 MPa needed to actuate a light clamping gate on a depaneling router, using its 150 mm stroke to clear the Z-axis spindle during board changes.
Drives a low-friction linear slide to seat ribbon-cable connectors into PCB headers, where the U flat-end back cover provides a rigid frame and the -S magnet confirms insertion via a DMSG sensor.
Kicks lightweight plastic trays out of a forming press, with the fixed rubber bumper absorbing the end-of-stroke impact to protect the thin-walled packaging material.
At 0.5 MPa this 20 mm bore generates 157 N of push force. If your assembly needs less push, there is no smaller MBL bore, so you would need to step down to a different AirTAC mini cylinder family. If you need more force, the next size up is the 25 mm bore, which provides 245 N of push at 0.5 MPa. For faster or heavier moving masses, consider the MBLC variant, which replaces the fixed rubber bumper with an adjustable air cushion. If your mechanism only needs air to extend and a spring to retract, use the MSBL single-acting push cylinder.
With a 150 mm stroke on an Ø8 mm rod, the unsupported piston rod is highly susceptible to bending under side loads. To prevent premature wear, guide the load externally or select the MBLD double-rod cylinder for anti-rotation. Remember that a plain MBL does not hold position when air is exhausted; add an external pilot-operated check valve if the load must stay put. For a direct replacement, match the 20 mm bore, 150 mm stroke, G1/8 port, NPT thread, U flat-end cover, and -S magnet.
Quick checklist
The 20 mm bore yields 157 N of push and 132 N of pull at 0.5 MPa. At 0.7 MPa the push force is 220 N. The theoretical maximum force is 32 kgf at 1.0 MPa. It operates on filtered air between 0.15 and 1.0 MPa.
No, the base MBL20X150SUT uses a fixed rubber bumper to soften end-of-stroke impacts. It does not have an adjustable cushion screw. If your application moves a heavier mass and requires adjustable end-cushioning, upgrade to the AirTAC MBLC variant.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.