
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL20X150UT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 150mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL20X150UT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. With a 20mm bore and 150mm stroke, it generates 157 N of push force and 132 N of pull force at 0.5 MPa. The U suffix denotes a rigid flat-end rear cover, providing a solid fixed mounting footprint for straightforward inline pushing tasks.
Unlike tie-rod ISO cylinders, the MBL body uses a riveted rolling-packed aluminum barrel that crimps the front and rear covers to the tube, ensuring a lightweight yet permanently sealed construction. The carbon-steel piston rod features 20 um hard-chrome plating for wear resistance, while a heterogeneous two-way piston seal retains grease for long service life. This SKU lacks the -S magnet suffix, so it cannot accept a CMSG, DMSG, or EMSG position sensor. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL20X150UT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø20 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | — |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 20 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Actuates the cutting head on a compact PCB router, using the 150mm stroke to traverse the board width with 157 N of push force.
Pushes lightweight plastic injection-molded parts out of a mold cavity, where the rigid U flat-end cover mounts flush to the machine frame.
Shifts a small pneumatic flap to divert thin product cartons on a conveyor, fitting within the tight 20mm bore spacing constraints.
At 0.5 MPa, this 20mm bore yields 157 N push force. If your application requires less force, the next size down does not exist in the MBL series, but if you need more power, stepping up to the 25mm bore provides 245 N push. Choose the MBLC variant if your cycle speed demands an adjustable air cushion, as the base MBL uses a fixed rubber bumper. For single-acting spring-return needs, consider the MSBL (push) or MTBL (pull) alternatives.
With a 150mm stroke on an Ø8 mm rod, side-load tolerance is minimal. Long unsupported strokes cause rod-bearing bending and premature seal wear under lateral stress. To manage this, use an external guide rail, switch to a CA pivot back cover for arcing loads, or select the MBLD double-rod cylinder for anti-rotation. The MBL does not hold a load when air pressure is lost; use an external rod lock or pilot-operated check valve if position holding is required. Replacement match: 20mm bore, 150mm stroke, G1/8 port, NPT thread, U flat-end cover, no magnet.
Quick checklist
This double-acting cylinder delivers 157 N push and 132 N pull at 0.5 MPa, 220 N push at 0.7 MPa, and a maximum theoretical force of 32 kgf at 1.0 MPa. It operates at speeds of 30-800 mm/s.
The base MBL uses a fixed rubber bumper to soften end-of-stroke impact, not an adjustable air cushion (for that, use the MBLC variant). Additionally, this specific SKU lacks the -S magnet suffix, so it cannot accept a CMSG, DMSG, or EMSG sensor switch.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.