
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL20X15CAT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 15mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL20X15CAT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. With a 20mm bore and 15mm stroke, it generates 157N of push force and 132N of pull force at 0.5 MPa. The genuine AirTAC riveted rolling-packed barrel crimps the front and rear covers directly to the tube, ensuring a lightweight footprint that easily fits where larger tie-rod bodies cannot.
This specific SKU features a CA pivot (clevis) back cover that swings on a pin to accommodate arcing or angular loads, distinguishing it from rigid flat-end U mounts. Internally, a heterogeneous two-way piston seal retains grease for long service life, while the Ø8mm carbon-steel piston rod features 20μm hard-chrome plating for wear resistance. Because this model lacks the -S suffix, it cannot be fitted with a CMSG, DMSG, or EMSG position sensor switch. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL20X15CAT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø20 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | — |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 20 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Ideal for small assembly robots needing 157N push to extend miniature parallel grippers that move electronic components across short 15mm arcs.
Provides the precise angular push required to guide lightweight packaging flaps during continuous sealing processes without stalling.
Swings into position to hold delicate printed circuit boards firmly during automated flying-probe testing, utilizing its CA clevis for angular compliance.
If you need less force, step down is not an option as 20mm is the smallest bore in this series. To step up, the 25mm bore provides 245N of push force at 0.5 MPa. The base MBL uses a fixed rubber bumper to soften end-of-stroke impact; if your application requires adjustable air cushioning for heavier moving masses, select the MBLC variant. For single-acting spring-return needs, consider the MSBL or MTBL models.
This MBL20X15CAT configuration pairs a 15mm stroke with a G1/8 port, an M8x1.25 rod-end thread, and a NPT tapered port thread. Remember that a standard double-acting cylinder does not hold its load if air pressure drops or the valve is centered; the rod will drift. Use an external pilot-operated check valve or rod lock if position holding is critical.
Quick checklist
At 0.5 MPa, this 20mm bore cylinder provides 157N of push force and 132N of pull force. At 0.7 MPa, the push force increases to 220N. The maximum theoretical force is 32 kgf at 1.0 MPa, with a proof pressure of 1.5 MPa.
The base MBL20X15CAT uses a fixed rubber bumper on the end caps, meaning the end-of-stroke impact is not adjustable. To get adjustable air cushions, you must switch to the MBLC variant. Additionally, this specific SKU lacks a built-in magnet, so it cannot accept CMSG, DMSG, or EMSG sensor switches for position detection.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.