
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL20X15SUT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 15mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL20X15SUT is a double-acting aluminum mini round cylinder engineered for ultra-short 15mm strokes in extremely tight machine spaces. It delivers 157 N of push force and 132 N of pull force at 0.5 MPa, making it well-suited for micro-ejecting or short part-trapping tasks. Because this SKU includes the -S suffix, it features a built-in magnet for non-contact position detection via CMSG reed or DMSG and EMSG solid-state sensor switches. The U flat-end back cover provides a rigid, fixed rear mounting face.
Unlike tie-rod cylinders that can be unbolted and rebuilt, the MBL body uses a riveted rolling-packed aluminum barrel where the covers are crimped permanently to the tube, ensuring a featherweight footprint. Inside, a heterogeneous two-way piston seal retains lubricating grease for long cycle life, while the Ø8 mm carbon-steel piston rod is protected by 20 µm of hard-chrome plating to resist wear and minor corrosion. End-of-stroke deceleration is handled by a fixed rubber bumper rather than an adjustable cushion screw. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL20X15SUT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø20 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | — |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 20 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Uses the 15mm stroke and 157N push force to eject populated printed circuit boards from test fixtures without damaging delicate SMD components.
Acts as a compact physical gate in packaging machines, briefly holding back small cartons or blister packs with 132N of pull force before release.
Fits within the narrow frame of lab automation to deflect small medical vials, relying on the U flat-end cover for rigid, zero-play mounting.
At 157 N push force (0.5 MPa), this 20 mm bore handles small, low-mass parts. If you need less force, there is no smaller MBL bore, so you would look outside the series; if you need more clamping power, step up to the 25 mm bore, which provides 245 N of push force at 0.5 MPa. Choose the MBLC variant if your short-stroke cycle runs fast enough to require adjustable air cushioning, or the MSBL/MTBL single-acting models if you only need a spring-return push or pull action.
For replacements, match the 20 mm bore, 15 mm stroke, G1/8 port size, NPT thread form, U flat-end back cover, and the built-in -S magnet. Remember that the fixed rubber bumper only softens end-stop impact; a plain MBL does not hold a load if air pressure is lost or the valve is centered, so add an external rod lock or pilot-operated check valve if position retention is critical.
Quick checklist
At 0.5 MPa, this 20mm bore cylinder provides 157 N push and 132 N pull force. At 0.7 MPa, the push force increases to 220 N, with a theoretical maximum of 32 kgf at 1.0 MPa. The operating speed ranges from 30-800 mm/s.
The base MBL uses a fixed rubber bumper to soften end-of-stroke impact and cannot be adjusted; for adjustable air cushioning, select the MBLC variant. Because this MBL20X15SUT model includes the -S suffix, it has a built-in magnet and is fully compatible with AirTAC CMSG, DMSG, and EMSG sensor switches.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.