
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL20X160CAT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 160mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL20X160CAT is a double-acting aluminum mini round cylinder engineered for tight machine spaces. Operating at 0.5 MPa, it provides 157 N of push force and 132 N of pull force across its 160 mm stroke. The CA pivot back cover allows the body to swing on a pin, making it ideal for arcing or angular load applications where a rigid mount would bind.
This SKU lacks the -S magnet suffix, meaning it cannot accept a CMSG, DMSG, or EMSG position sensor. Impact deceleration relies on a fixed rubber bumper rather than an adjustable air cushion. The riveted rolling-packed barrel permanently crimps the covers to the tube for a lightweight footprint, while the carbon steel piston rod features 20 um hard-chrome plating to resist wear and corrosion. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL20X160CAT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø20 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | — |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 20 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Swings a lightweight deflector plate on a packaging line to sort small pouches, utilizing the 160 mm stroke and CA pivot to accommodate the arcing motion of the arm.
Pushes a low-friction guide rail to align circuit boards entering a wave soldering machine, providing 157 N of gentle clamping force without crushing the delicate fiberglass.
Extends to feed small brass valve stems into a machining fixture, where the compact riveted aluminum body fits easily within the multi-spindle tooling envelope.
For lower force needs, step down to the 12 mm bore MI series, or if slightly more push is required, step up to the 25 mm MBL which yields 245 N at 0.5 MPa. If your cycle speed creates severe end-of-stroke shock, upgrade to the MBLC variant for an adjustable air cushion instead of this fixed rubber bumper. Because the 160 mm stroke extends an Ø8 mm rod, use the CA clevis to prevent side-load binding, or select an MBLD double-rod cylinder for anti-rotation guidance. This MBL20X160CAT uses a G1/8 port, NPT thread form, M8x1.25 rod-end thread, and a CA pivot back cover. Note that a plain MBL does not hold its position if air pressure drops; install an external pilot-operated check valve if load locking is required.
Quick checklist
At 0.5 MPa it pushes with 157 N and pulls with 132 N. At 0.7 MPa the push force increases to 220 N, with a theoretical maximum of 32 kgf at 1.0 MPa. The operational speed ranges from 30-800 mm/s.
Because this specific SKU lacks the -S suffix, it cannot accept a CMSG, DMSG, or EMSG sensor switch. Additionally, it uses a fixed rubber bumper for end-of-stroke deceleration; if you need adjustable air cushioning, you must switch to the MBLC variant.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.