
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL20X160SCAT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 160mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL20X160SCAT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. It features a 20mm bore and a 160mm stroke, generating 157 N of push force and 132 N of pull force at 0.5 MPa. The riveted rolling-packed barrel permanently crimps the front and rear covers to the tube, creating an exceptionally light yet rigid frame that is not designed to be disassembled like a traditional tie-rod cylinder.
This specific SKU includes a built-in magnet (-S) for use with AirTAC CMSG reed or DMSG/EMSG solid-state sensor switches to track rod position. The CA pivot back cover allows the cylinder body to swing on a pin, making it ideal for arcing and angular load applications. Inside, a heterogeneous two-way piston seal retains grease for long service life, while the Ø8 mm carbon steel rod features 20 µm hard-chrome plating for wear and corrosion resistance. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL20X160SCAT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø20 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | — |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 20 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Drives a small linear blade carriage in a tight electronics fixture, using the 160mm stroke and 157 N push force to singulate printed circuit boards.
Utilizes the CA pivot bracket to swing a thread guide arm into position on a weaving machine, accommodating the arcing motion required during high-speed operation.
Actuates a small mechanical flap-folding arm at the infeed of a compact case packing machine, where the short stroke and light aluminum body save valuable space.
If you need less reach, the neighbouring MBL20X100SCA offers the same 157 N push force at a shorter 100mm stroke. For heavier pushes, stepping up to the 25mm bore yields 245 N of push force at 0.5 MPa. Because this is a 160mm stroke on an Ø8mm rod, the side-load tolerance is low; rely on the CA pivot to absorb angular stress, add an external guide, or switch to an MBLD double-rod cylinder to prevent bending. The base MBL uses a fixed rubber bumper to soften end-of-stroke impact (upgrade to the MBLC variant for adjustable air cushion). Note that this cylinder cannot hold a load if air pressure drops; install an external rod lock or pilot-operated check valve for fail-safe positioning. Replacement match: 20mm bore, 160mm stroke, G1/8 port, NPT thread, CA pivot cover, magnet included.
Quick checklist
At 0.5 MPa, the push force is 157 N and the pull force is 132 N. At 0.7 MPa, the push force is 220 N. The maximum theoretical force is 32 kgf at 1.0 MPa.
No, the base MBL20X160SCAT features a fixed rubber bumper to absorb end-of-stroke impact. If your application requires adjustable air cushioning to handle faster cycling or heavier moving masses, you should select the MBLC variant instead.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.