
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL20X160SUT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 160mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL20X160SUT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. Operating at 0.5 MPa, it generates 157 N of push force and 132 N of pull force over a 160 mm stroke. The U suffix designates a flat-end rear cover, providing a rigid fixed mounting footprint for straightforward inline installations.
Unlike tie-rod bodies, this cylinder uses a riveted rolling-packed aluminum barrel where the covers are crimped to the tube, making it exceptionally light but not designed for field disassembly. The -S suffix indicates a built-in magnet for position detection via AirTAC CMSG reed or DMSG and EMSG solid-state sensor switches. End-of-stroke deceleration relies on a fixed rubber bumper rather than an adjustable air cushion. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL20X160SUT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø20 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | — |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 20 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Uses the 157 N push force to eject printed circuit boards from an assembly fixture without damaging delicate traces.
Actuates a diverter gate in a small-parts sorting bowl, relying on the 160 mm stroke to clear the full lane width.
Folds lightweight cardboard flaps on a packaging line where the compact riveted body fits within narrow conveyor frames.
At 157 N push force (0.5 MPa), this 20 mm bore suits light-duty positioning; stepping down is not an option as this is the smallest MBL size, but stepping up to the 25 mm bore yields 245 N push if your payload increases. Because this SKU lacks an adjustable air cushion, choose the MBLC variant if your 160 mm stroke moves a heavier mass and requires end-of-stroke deceleration tuning. The fixed rubber bumper softens impact but does not lock the rod; if pressure drops, the load will drift, requiring an external pilot-operated check valve for position holding. Replacement requires matching the 20 mm bore, 160 mm stroke, G1/8 port, NPT thread, U flat-end cover, and the built-in magnet.
Quick checklist
At 0.5 MPa it provides 157 N push and 132 N pull; at 0.7 MPa push increases to 220 N. The theoretical maximum force is 32 kgf at 1.0 MPa. It operates at speeds between 30 and 800 mm/s.
The base MBL uses a fixed rubber bumper that cannot be adjusted; for adjustable air cushioning, select the MBLC variant. This specific SKU includes a built-in magnet (-S) and is fully compatible with AirTAC CMSG, DMSG, and EMSG sensor switches.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.