
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL20X160UT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 160mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL20X160UT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. With a 20mm bore and 160mm stroke, it yields 157 N of push force and 132 N of pull force at 0.5 MPa. The U flat-end back cover provides a rigid fixed rear mount, ideal for straightforward in-line actuation rather than arcing pivot movements.
Unlike tie-rod bodies, this unit features a riveted rolling-packed barrel that cannot be disassembled for rebuilding, ensuring a highly lightweight and economical footprint. The Ø8 mm carbon-steel piston rod is treated with 20 µm hard-chrome plating for superior wear and corrosion resistance. Because this specific SKU lacks the -S suffix, it cannot accept a CMSG, DMSG, or EMSG position sensor. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL20X160UT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø20 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | — |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 20 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Drives a 160mm stroke to push populated printed circuit boards out of a testing fixture, utilizing the 157 N push force to overcome edge connector friction.
Extends a folding arm inside a compact packaging machine to tuck small cardboard flaps, fitting within the tight 20mm bore clearance envelope.
Actuates a 160mm pusher pin in a lab automation line to index lightweight plastic vial trays, relying on the rigid U flat-end back cover for alignment.
At 0.5 MPa, this 20mm bore generates 157 N push force. If your application requires less power, the smallest available neighbor is the 20mm itself, but if you need more force, stepping up to the 25mm bore provides 245 N of push force. For single-direction tasks where return air pressure is unnecessary, consider the MSBL (push) or MTBL (pull) single-acting variants.
This base MBL model uses a fixed rubber bumper to soften end-of-stroke impacts; for adjustable air cushioning to handle heavier loads at higher speeds, specify the MBLC variant instead. Since the 160mm stroke is substantial for an Ø8 mm rod, external guides or a pivot mounting are recommended to prevent rod-bearing bending under side loads. Note that this cylinder cannot hold a load if air pressure is lost or exhausted, as the bumper is not a locking mechanism.
Quick checklist
At 0.5 MPa, the push force is 157 N and the pull force is 132 N. At 0.7 MPa, the push force increases to 220 N, with a maximum theoretical force of 32 kgf at 1.0 MPa. The operating speed ranges from 30-800 mm/s.
No, this specific SKU lacks the -S magnet suffix, so it cannot accept CMSG, DMSG, or EMSG sensor switches. Additionally, the base MBL uses a fixed rubber bumper; for adjustable air cushioning, you must select the MBLC variant.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.