
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL20X175-CAT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 175mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL20X175-CAT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. With a 20mm bore and 175mm stroke, it generates 157N of push force and 132N of pull force at 0.5 MPa. The CA pivot back cover allows the cylinder body to swing on a pin, making it ideal for arcing or angular load applications where a rigid fixed mount would induce binding. This genuine AirTAC component features a riveted rolling-packed aluminum barrel that crimps the covers directly to the tube, ensuring a lightweight footprint. Unlike tie-rod bodies, this sealed construction is not designed to be disassembled and rebuilt in the field.
The internal sealing system relies on a heterogeneous two-way piston seal that retains grease for long service life, while the carbon steel piston rod features 20 um hard-chrome plating for wear and corrosion resistance. Because this specific SKU lacks the -S suffix, it has no built-in magnet and cannot support CMSG, DMSG, or EMSG position sensing. The end-of-stroke deceleration is handled by a fixed rubber bumper, not an adjustable cushion screw. If your mechanism needs a direct replacement, match the 20mm bore, 175mm stroke, G1/8 port, NPT thread form, and the CA clevis back cover.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL20X175-CAT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø20 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | — |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 20 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Drives an arcing guide arm on a textile loom where the CA pivot back cover accommodates the angular swing path, using the 157N push force to tension yarn threads.
Actuates a lightweight swing gate to divert small plastic bottles on a packaging line, leveraging the compact 20mm round body to fit within narrow conveyor side-rails.
Folds small corrugated carton flaps on a packaging machine where the 175mm stroke provides the necessary reach and the fixed rubber bumper softens the end-of-stroke impact.
When sizing this actuator, stepping down to the smaller MBL20 bore is not an option, but stepping up to the MBL25 bore yields 245N of push force at 0.5 MPa if your payload exceeds the current 157N output. If you need to manage heavier moving masses at higher speeds, the MBLC variant offers an adjustable air cushion to absorb kinetic energy that the base MBL's fixed rubber bumper cannot. Remember that a plain MBL does not hold its position or load when air pressure is lost, exhausted, or the valve is centred; the rod drifts or drops. If a load must be held without live pressure, install an external rod lock or a pilot-operated check valve.
Because this 175mm stroke pushes an 8 mm rod over a long unsupported distance, side-load tolerance is low. Long strokes require an external guide, the CA pivot back cover to self-align, or the MBLD double-rod anti-rotation type to prevent rod-bearing bending under offset loads.
Quick checklist
This double-acting cylinder operates on filtered air at 0.15-1.0 MPa. At 0.5 MPa it provides 157N of push force and 132N of pull force. At 0.7 MPa the push force is 220N. The maximum theoretical force is 32 kgf at 1.0 MPa.
No, the base MBL20X175-CAT uses a fixed rubber bumper to soften end-of-stroke impacts, not an adjustable air cushion. If your application requires adjustable cushioning for heavier loads, you must switch to the MBLC variant. Additionally, this SKU lacks a built-in magnet, so CMSG, DMSG, or EMSG sensor switches cannot be fitted.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.