verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart1 Request a QuoteQuote
AirTAC MBL Series · Aluminum-Barrel Mini Cylinder

Airtac MBL Aluminum Alloy Mini Cylinder MBL20X175SCAT

The AirTAC MBL Aluminum Alloy Mini Cylinder MBL20X175SCAT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 175mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.

  • BoreØ20 mm
  • Stroke175 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM8×1.25
  • CushionRubber bumper (MBLC variant: adjustable air cushion)
$34.15 $41.65Save 18% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MBL20 stroke, mounting and version on one page All MBL20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MBL Aluminum Alloy Mini Cylinder MBL20X175SCAT

The AirTAC MBL20X175SCAT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. It features a 20mm bore and 175mm stroke, generating 157 N of push force and 132 N of pull force at 0.5 MPa. The riveted rolling-packed barrel crimps the front and rear covers directly to the tube, creating an exceptionally light assembly that is not designed to be disassembled like a traditional tie-rod cylinder.

This specific SKU includes a built-in magnet (-S) for compatibility with AirTAC CMSG, DMSG, and EMSG sensor switches to track rod position. It is fitted with a CA pivot back cover, allowing the cylinder body to swing on a pin to accommodate arcing or angular loads. The Ø8 mm carbon-steel piston rod features 20 µm hard-chrome plating for high wear and corrosion resistance, paired with a heterogeneous two-way piston seal that retains grease for a long service life. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac MBL Aluminum Alloy Mini Cylinder MBL20X175SCAT Technical Specifications

ModelAirtac MBL Aluminum Alloy Mini Cylinder MBL20X175SCAT
SeriesMBL aluminum-barrel mini round cylinder
Bore sizeØ20 mm
Stroke175 mm
Acting typeDouble acting
Port size1/8"
Rod threadM8×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionRubber bumper (MBLC variant: adjustable air cushion)
Max strokeUp to 500 mm

Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa157 N132 N
0.7 MPa220 N—
Max (@1.0 MPa)32 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MBL Aluminum Alloy Mini Cylinder MBL20X175SCAT

MBLAluminum-barrel mini round cylinder, double acting.
20Bore size in mm.
×175Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).

Where the Airtac MBL Aluminum Alloy Mini Cylinder MBL20X175SCAT Is Used

precision_manufacturing

Textile Loom Yarn Guide

Drives a pivoting yarn guide arm across a narrow loom carriage. The CA pivot back cover handles the angular arcing motion, while the 157 N push force precisely shifts the thread path without stalling.

memory

PCB Conveyor Diverter

Swings a small routing flap on a tight electronics assembly line conveyor. The built-in magnet pairs with a DMSG solid-state sensor to confirm gate position, fitting easily into the 20mm bore footprint.

biotech

Lab Vial Tray Ejector

Pushes lightweight sample trays out of a centrifuge slot. The compact riveted aluminum body saves valuable space in the machine chassis, and the fixed rubber bumper absorbs the impact of the 175mm extension.

Is the Airtac MBL Aluminum Alloy Mini Cylinder MBL20X175SCAT the Right Cylinder?

If you need slightly less force, step down to the 20mm bore's smaller neighbour, the 32mm bore, which actually provides higher push force (402 N at 0.5 MPa); conversely, stepping up to the 25mm bore yields 245 N. For applications requiring faster cycle speeds or heavier moving masses at the end of the stroke, consider the MBLC variant, which replaces the base MBL's fixed rubber bumper with an adjustable air cushion. If you need single-acting spring-return operation, look at the MSBL (push) or MTBL (pull) variants. Keep in mind the fixed rubber bumper only softens end-of-stroke impact and does not hold the load; if air pressure is lost, the rod will drift, so an external rod lock or pilot-operated check valve is required for position holding.

At 175 mm of stroke, the small Ø8 mm rod has limited side-load tolerance. To prevent rod-bearing bending under offset loads, use an external guide alongside the CA pivot back cover, or switch to the MBLD double-rod type for anti-rotation. Replacement match: 20mm bore, 175mm stroke, G1/8 port, NPT thread, CA pivot back cover, magnet included (-S).

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB / FA / SDB) and back cover (CA pivot / U flat-end).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MBL Aluminum Alloy Mini Cylinder MBL20X175SCAT FAQ

At 0.5 MPa, this 20mm bore cylinder provides 157 N of push force and 132 N of pull force. At 0.7 MPa, the push force increases to 220 N, with a maximum theoretical force of 32 kgf at 1.0 MPa. The double-acting speed range is 30-800 mm/s.

No, the base MBL20X175SCAT uses a fixed rubber bumper to soften end-of-stroke impacts, not an adjustable cushion screw. If your application requires adjustable end-position damping for heavier loads, you must upgrade to the MBLC variant.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MBL Cylinders

Request a Quote for Airtac MBL Aluminum Alloy Mini Cylinder MBL20X175SCAT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MBL20X175SCAT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.