
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL20X175SUT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 175mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL20X175SUT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. At 20mm bore, it supplies 157 N of push force and 132 N of pull force at 0.5 MPa, making it ideal for moving small jigs over its 175mm stroke. The riveted rolling-packed barrel keeps the body light and small, though it is not designed to be disassembled like a tie-rod cylinder.
This specific SKU includes a U flat-end back cover for rigid fixed mounting and a built-in magnet (-S) for position detection. The magnet works seamlessly with AirTAC CMSG (reed), DMSG, and EMSG (electronic) sensor switches. The carbon-steel piston rod features a 20 um hard-chrome plating for wear resistance, paired with a heterogeneous two-way piston seal that retains grease for a long service life. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL20X175SUT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø20 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | — |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 20 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Uses the 157 N push force and 175mm stroke to extend and precisely position light electronic pick-and-place heads in tight assembly machinery.
Drives a 175mm travel arm to tuck minor flaps on small packaging cartons before sealing, fitting into narrow conveyor gaps.
Pushes racks of centrifuge tubes out of heated blocks, relying on the built-in magnet and CMSG sensor to confirm full ejection.
Choose this 20mm bore when you need exactly 157 N of push force at 0.5 MPa. If your payload is lighter, stepping down is not an option as 20mm is the smallest available MBL bore. If you need more power, the next size up is the 25mm bore, which provides 245 N of push force at 0.5 MPa. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
Because the 175mm stroke is relatively long for an Ø8mm rod, side-load tolerance is low. To prevent rod-bearing bending, use an external guide or a pivot mount. The fixed rubber bumper softens end-of-stroke impact but is not an adjustable air cushion (choose the MBLC variant for that). The bumper is also not a lock; this cylinder will drift if air pressure is lost or the valve is centered.
Quick checklist
This 20mm bore cylinder delivers 157 N push and 132 N pull at 0.5 MPa, 220 N push at 0.7 MPa, and a maximum theoretical force of 32 kgf at 1.0 MPa. It operates at speeds of 30-800 mm/s.
The base MBL uses a fixed rubber bumper to soften end-of-stroke impact; it does not have an adjustable air cushion (you would need the MBLC variant for that). Additionally, the bumper is not a lock, so the rod will drift or drop if air pressure is lost.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.