
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL20X175UT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 175mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL20X175UT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. At 0.5 MPa it generates 157 N of push force and 132 N of pull force, making it well suited for light-duty positioning over its 175 mm stroke. The U suffix denotes a rigid flat-end rear cover for fixed foot-style mounting.
This SKU lacks the -S suffix, so it cannot accept a CMSG, DMSG or EMSG position sensor. Instead of an adjustable cushion, the internal fixed rubber bumper absorbs end-of-stroke impact. The riveted rolling-packed aluminum barrel keeps the body light and compact but is not designed to be disassembled, while the carbon-steel piston rod features 20 µm hard-chrome plating for wear resistance. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL20X175UT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø20 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | — |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 20 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Provides 157 N of push at 0.5 MPa to hold delicate printed circuit boards firmly against an edge guide during high-speed pick-and-place assembly.
Cycles through its 175 mm stroke to fold small corrugated carton flaps in compact packaging lines where a larger ISO cylinder would not fit.
Deploys its 132 N pull force to retract a small ejection pin, pushing processed sample vials out of a centrifuge carousel in diagnostic equipment.
If you need less force, the neighbouring 20 mm bore is the smallest available; stepping up to the 32 mm bore yields 402 N push at 0.5 MPa for heavier moves. For faster cycle speeds or heavier payloads requiring end-deceleration, select the MBLC variant with its adjustable air cushion rather than this fixed rubber bumper. If you need single-acting spring-return motion, consider the MSBL or MTBL models.
Because the 175 mm stroke is substantial for an Ø8 mm rod, side-load tolerance is low; use an external guide rail or a pivot knuckle to prevent rod-bearing bending. This MBL20X175UT configuration specifies a 20 mm bore, 175 mm stroke, G1/8 port, NPT thread form, U flat-end back cover, and no magnet. A plain double-acting cylinder does not hold its load if air pressure is lost or exhausted—the rod will drift—so add an external rod lock or pilot-operated check valve if position retention is required.
Quick checklist
The MBL20X175UT generates 157 N push and 132 N pull at 0.5 MPa, 220 N push at 0.7 MPa, and a maximum theoretical force of 32 kgf at 1.0 MPa.
This specific SKU lacks the -S magnet, so no CMSG, DMSG or EMSG sensor switch can be fitted. It uses a fixed rubber bumper for end-of-stroke impact absorption; for adjustable air cushioning, choose the MBLC variant.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.