verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart1 Request a QuoteQuote
AirTAC MBL Series · Aluminum-Barrel Mini Cylinder

Airtac MBL Aluminum Alloy Mini Cylinder MBL20X200-CAT

The AirTAC MBL Aluminum Alloy Mini Cylinder MBL20X200-CAT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 200mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.

  • BoreØ20 mm
  • Stroke200 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM8×1.25
  • CushionRubber bumper (MBLC variant: adjustable air cushion)
$32.54 $40.04Save 18% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MBL20 stroke, mounting and version on one page All MBL20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MBL Aluminum Alloy Mini Cylinder MBL20X200-CAT

The AirTAC MBL20X200-CAT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. It generates 157 N of push force and 132 N of pull force at 0.5 MPa, making it suitable for light-duty positioning over its 200 mm stroke. The body utilizes a riveted rolling-packed construction where the covers are crimped to the tube, ensuring a lightweight footprint that is not designed to be disassembled like a traditional tie-rod cylinder.

This specific SKU features a CA pivot (clevis) back cover that swings on a pin to accommodate arcing or angular loads. It uses a carbon-steel piston rod with a 20 um hard-chrome plating for wear resistance, paired with a heterogeneous two-way piston seal that retains grease for long service life. Because this configuration lacks the -S suffix, it cannot accept a CMSG, DMSG, or EMSG position sensor. The end-of-stroke impact is managed by a fixed rubber bumper rather than an adjustable air cushion (which requires the MBLC variant). This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac MBL Aluminum Alloy Mini Cylinder MBL20X200-CAT Technical Specifications

ModelAirtac MBL Aluminum Alloy Mini Cylinder MBL20X200-CAT
SeriesMBL aluminum-barrel mini round cylinder
Bore sizeØ20 mm
Stroke200 mm
Acting typeDouble acting
Port size1/8"
Rod threadM8×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionRubber bumper (MBLC variant: adjustable air cushion)
Max strokeUp to 500 mm

Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa157 N132 N
0.7 MPa220 N—
Max (@1.0 MPa)32 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MBL Aluminum Alloy Mini Cylinder MBL20X200-CAT

MBLAluminum-barrel mini round cylinder, double acting.
20Bore size in mm.
×200Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).

Where the Airtac MBL Aluminum Alloy Mini Cylinder MBL20X200-CAT Is Used

precision_manufacturing

Electronic PCB Shuttle

Transfers bare printed circuit boards between testing stations, using the 157 N push force and CA pivot to absorb slight angular guide misalignments over 200 mm.

memory

Pick-and-Place Ejection

Ejects lightweight plastic chip trays from a molding machine, where the compact riveted aluminum body fits within tight tooling clearances and the pivot mount prevents rod binding.

inventory_2

Small Part Sorting

Diverts small polypropylene caps on a packaging conveyor, relying on the 132 N pull force to retract the actuator quickly without consuming valuable floor space.

Is the Airtac MBL Aluminum Alloy Mini Cylinder MBL20X200-CAT the Right Cylinder?

If you need less extension, the neighboring MBL20X150 offers a shorter 150 mm stroke with the same 157 N push force. To increase output force, stepping up to the MBL25 bore provides 245 N of push at 0.5 MPa. The MBL20X200-CAT uses a G1/8 port with NPT threading, an Ø8 mm rod with an M8x1.25 thread end, and a CA pivot back cover.

At 200 mm of stroke, the small Ø8 mm rod has limited side-load tolerance; the CA pivot back cover on this unit helps safely absorb angular misalignment. If your application requires anti-rotation or dual-side force, consider the MBLD double-rod type. Note that a plain MBL does not hold its load when air pressure is lost or the valve is centered, as the rubber bumper only softens end-stroke impact and acts as no lock or brake.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB / FA / SDB) and back cover (CA pivot / U flat-end).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MBL Aluminum Alloy Mini Cylinder MBL20X200-CAT FAQ

This cylinder delivers 157 N push and 132 N pull at 0.5 MPa, 220 N push at 0.7 MPa, and a maximum theoretical force of 32 kgf at 1.0 MPa. It operates at speeds between 30 and 800 mm/s.

This SKU uses a fixed rubber bumper to soften end-of-stroke impact; for an adjustable air cushion, you must select the MBLC variant. Additionally, because it lacks the -S suffix, no CMSG, DMSG, or EMSG position sensor can be fitted.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MBL Cylinders

Request a Quote for Airtac MBL Aluminum Alloy Mini Cylinder MBL20X200-CAT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MBL20X200-CAT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.