verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart1 Request a QuoteQuote
AirTAC MBL Series · Aluminum-Barrel Mini Cylinder

Airtac MBL Aluminum Alloy Mini Cylinder MBL20X200SUT

The AirTAC MBL Aluminum Alloy Mini Cylinder MBL20X200SUT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 200mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.

  • BoreØ20 mm
  • Stroke200 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM8×1.25
  • CushionRubber bumper (MBLC variant: adjustable air cushion)
$35.04 $42.54Save 17% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MBL20 stroke, mounting and version on one page All MBL20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MBL Aluminum Alloy Mini Cylinder MBL20X200SUT

The AirTAC MBL20X200SUT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. It delivers 157 N of push force and 132 N of pull force at 0.5 MPa, making it suited for low-weight positioning over a 200 mm stroke. The riveted rolling-packed barrel permanently crimps the front and rear covers to the tube, keeping the body light and small but preventing field disassembly unlike tie-rod designs.

This SKU includes a built-in magnet (-S) for CMSG, DMSG, or EMSG sensor switches to detect rod position, and features a U flat-end back cover for rigid mounting. The carbon-steel piston rod has 20 um hard-chrome plating for wear resistance, and the heterogeneous two-way piston seal retains grease for a long service life. End-of-stroke impact is absorbed by a fixed rubber bumper rather than an adjustable cushion. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac MBL Aluminum Alloy Mini Cylinder MBL20X200SUT Technical Specifications

ModelAirtac MBL Aluminum Alloy Mini Cylinder MBL20X200SUT
SeriesMBL aluminum-barrel mini round cylinder
Bore sizeØ20 mm
Stroke200 mm
Acting typeDouble acting
Port size1/8"
Rod threadM8×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionRubber bumper (MBLC variant: adjustable air cushion)
Max strokeUp to 500 mm

Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa157 N132 N
0.7 MPa220 N—
Max (@1.0 MPa)32 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MBL Aluminum Alloy Mini Cylinder MBL20X200SUT

MBLAluminum-barrel mini round cylinder, double acting.
20Bore size in mm.
×200Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).

Where the Airtac MBL Aluminum Alloy Mini Cylinder MBL20X200SUT Is Used

memory

PCB Shuttle Pusher

Moves populated PCB panels along a 200 mm conveyor lane using 157 N of push force without crowding the electronics assembly enclosure.

inventory_2

Carton Flap Folder

Actuates a lightweight cardboard folding arm in small packaging lines where the compact aluminum body fits between narrow guide rails.

biotech

Sample Tube Ejector

Ejects filled medical sample tubes from a testing carousel using 132 N of pull force, relying on the DMSG sensor to confirm the 200 mm retraction.

Is the Airtac MBL Aluminum Alloy Mini Cylinder MBL20X200SUT the Right Cylinder?

If 132 N of pull at 0.5 MPa is insufficient, step up to the bore 25 model (206 N pull). If you need less force and an even smaller footprint, the MBL line does not offer a smaller standard bore, making the 20 mm the optimal minimum choice. For applications needing end-stroke velocity control, select the MBLC variant for its adjustable air cushion. Because this is a 200 mm stroke on an Ø8 mm rod, external side-load guidance is recommended to prevent rod-bearing bending.

This MBL20X200SUT configuration uses a G1/8 port, NPT thread form, M8x1.25 rod-end thread, and a U flat-end back cover. The fixed rubber bumper softens end impacts but does not lock the rod; if the load must be held when air pressure is lost, fit an external pilot-operated check valve or rod lock, as the cylinder will drift.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB / FA / SDB) and back cover (CA pivot / U flat-end).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MBL Aluminum Alloy Mini Cylinder MBL20X200SUT FAQ

At 0.5 MPa the push force is 157 N and the pull force is 132 N. At 0.7 MPa the push force is 220 N. The maximum theoretical force is 32 kgf at 1.0 MPa, which is the upper operating pressure limit.

No, the base MBL uses a fixed rubber bumper to absorb end-of-stroke impact. If you need adjustable air cushioning for heavier or faster moving loads, you must select the MBLC variant instead.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MBL Cylinders

Request a Quote for Airtac MBL Aluminum Alloy Mini Cylinder MBL20X200SUT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MBL20X200SUT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.