verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart1 Request a QuoteQuote
AirTAC MBL Series · Aluminum-Barrel Mini Cylinder

Airtac MBL Aluminum Alloy Mini Cylinder MBL20X20SCAT

The AirTAC MBL Aluminum Alloy Mini Cylinder MBL20X20SCAT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 20mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.

  • BoreØ20 mm
  • Stroke20 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM8×1.25
  • CushionRubber bumper (MBLC variant: adjustable air cushion)
$29.32 $36.82Save 20% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MBL20 stroke, mounting and version on one page All MBL20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MBL Aluminum Alloy Mini Cylinder MBL20X20SCAT

The AirTAC MBL20X20SCAT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. Delivering 157 N of push force and 132 N of pull force at 0.5 MPa, this 20 mm bore, 20 mm stroke unit is built for fast, light-duty cycling. The riveted rolling-packed aluminum barrel keeps the body light and small, though it is not designed to be disassembled and rebuilt like a standard tie-rod cylinder. This specific SKU includes a built-in magnet (-S) for non-contact rod position detection via CMSG reed or DMSG/EMSG electronic sensor switches.

The CA pivot back cover equips this cylinder with a rear clevis, allowing the body to swing freely on a pin to accommodate arcing or angular loads. Instead of an adjustable cushion, the base MBL relies on a fixed rubber bumper to soften end-of-stroke impacts. The carbon-steel piston rod features a 20 um hard-chrome plating for wear and corrosion resistance, paired with a heterogeneous two-way piston seal that retains grease for a long service life. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac MBL Aluminum Alloy Mini Cylinder MBL20X20SCAT Technical Specifications

ModelAirtac MBL Aluminum Alloy Mini Cylinder MBL20X20SCAT
SeriesMBL aluminum-barrel mini round cylinder
Bore sizeØ20 mm
Stroke20 mm
Acting typeDouble acting
Port size1/8"
Rod threadM8×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionRubber bumper (MBLC variant: adjustable air cushion)
Max strokeUp to 500 mm

Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa157 N132 N
0.7 MPa220 N—
Max (@1.0 MPa)32 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MBL Aluminum Alloy Mini Cylinder MBL20X20SCAT

MBLAluminum-barrel mini round cylinder, double acting.
20Bore size in mm.
×20Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).

Where the Airtac MBL Aluminum Alloy Mini Cylinder MBL20X20SCAT Is Used

memory

PCB Component Pick & Place

Ideal for small pick-and-place heads moving electronic parts, where the 157 N force is sufficient and the CA pivot absorbs slight misalignment during rapid retraction.

package

Packaging Flap Folding

Drives small cardboard flap folders on compact packaging lines, utilizing the 20 mm stroke and built-in magnet to confirm the fold cycle via a DMSG sensor.

biotech

Lab Sample Routing

Pivots small test-tube carriers in diagnostic analyzers, benefiting from the lightweight riveted aluminum body and the swing capability of the CA clevis.

Is the Airtac MBL Aluminum Alloy Mini Cylinder MBL20X20SCAT the Right Cylinder?

With a 157 N push force at 0.5 MPa, this 20 mm bore is the smallest standard size in the MBL series. If your application requires less force, you would step out of the mini round body line entirely, but if you need more power, stepping up to the 25 mm bore yields 245 N of push force at 0.5 MPa. Choose the MBLC variant if your cycle speeds demand an adjustable air cushion rather than the fixed rubber bumper found here. For single-acting push or pull operations in bores 20-40 mm, consider the MSBL or MTBL types.

Because this is a genuine AirTAC component, replacement is straightforward: match the 20 mm bore, 20 mm stroke, G1/8 port, default NPT thread, CA pivot back cover, and the -S magnet. Note that a plain MBL does not hold its position or load when air pressure is lost or the valve is centered; the rod drifts or drops. The rubber bumper only softens the end-of-stroke impact and is not a lock or brake, so use an external rod lock or pilot-operated check valve if the load must be held without live pressure.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB / FA / SDB) and back cover (CA pivot / U flat-end).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MBL Aluminum Alloy Mini Cylinder MBL20X20SCAT FAQ

At 0.5 MPa it provides 157 N push and 132 N pull; at 0.7 MPa it provides 220 N push. The maximum theoretical force is 32 kgf at 1.0 MPa. The port size is G1/8 with a default NPT thread form, and the rod diameter is 8 mm with an M8x1.25 rod-end thread.

The base MBL uses a fixed rubber bumper and cannot be adjusted; if you need adjustable end-cushioning, select the MBLC variant. This specific SKU includes a built-in magnet (-S) so you can mount CMSG reed or DMSG/EMSG electronic switches for position detection.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MBL Cylinders

Request a Quote for Airtac MBL Aluminum Alloy Mini Cylinder MBL20X20SCAT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MBL20X20SCAT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.