
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL20X20UT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 20mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL20X20UT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. Operating at 0.5 MPa, it provides 157 N of push force and 132 N of pull force across its 20 mm stroke, making it well-suited for small part ejection or lightweight gating tasks. The U flat-end back cover provides a rigid fixed rear mount for straightforward stationary installations.
Unlike tie-rod ISO cylinders, this unit features a riveted rolling-packed aluminum barrel that crimps the covers directly to the tube, minimizing weight and footprint. Inside, a heterogeneous two-way piston seal retains grease for long service life, while the Ø8 mm carbon-steel piston rod is protected by 20 µm hard-chrome plating to resist wear and corrosion. Note that this specific SKU lacks a built-in magnet, so it cannot support CMSG, DMSG, or EMSG electronic position sensing. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL20X20UT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø20 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | — |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 20 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Deploys a 20 mm stroke to push singulated printed circuit boards out of a routing nest, using the 157 N push force to overcome routing friction without damaging the substrate.
Acts as a compact stop gate in an electronics assembly line, holding delicate wire harness connectors at a precise height before a pick-and-place head descends.
Rapidly extends 20 mm to deflect empty glass vials off a high-speed conveyor into a filling carousel, fitting easily within the machine's tight 30 mm axial clearance.
At 20 mm bore, the MBL20X20UT yields 157 N push force at 0.5 MPa. If you need slightly less force, there is no smaller bore in this series, but if your application requires more power, stepping up to the 25 mm bore gives you 245 N push at 0.5 MPa. For single-acting spring-return tasks in bores 20-40 mm, consider the MSBL (push) or MTBL (pull) variants. Keep in mind that a plain double-acting cylinder does not hold its load if air pressure drops or the valve is centered; the rod will drift. Use an external pilot-operated check valve if you need position holding.
This model uses a G1/8 port with NPT tapered threading and a fixed rubber bumper on its end caps to soften stroke impact. Because the bumper is fixed rather than an adjustable cushion screw, you cannot tune the end-of-stroke deceleration. For faster or heavier loads requiring adjustable air cushioning, select the MBLC variant. When replacing, match the 20 mm bore, 20 mm stroke, U flat-end back cover, and no-magnet configuration.
Quick checklist
This 20 mm bore cylinder delivers 157 N push and 132 N pull at 0.5 MPa, 220 N push at 0.7 MPa, and a maximum theoretical force of 32 kgf at 1.0 MPa. It operates on filtered air at 0.15-1.0 MPa, runs at 30-800 mm/s, and uses a G1/8 port with an M8x1.25 rod-end thread.
Because this specific SKU lacks the -S suffix, it has no internal magnet and cannot accept CMSG, DMSG, or EMSG position switches. Additionally, the base MBL uses a fixed rubber bumper for end-of-stroke impact absorption, not an adjustable air cushion; you must upgrade to the MBLC variant for tunable deceleration.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.