
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL20X25-CAT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 25mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL20X25-CAT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. Delivering 157 N of push force at 0.5 MPa, this 20 mm bore, 25 mm stroke unit is tailored for small part actuation. The CA pivot (clevis) back cover allows the body to swing on a pin, accommodating arcing or angular load paths that a rigid fixed foot cannot.
Unlike tie-rod cylinders, this unit features a riveted rolling-packed barrel where the front and rear covers are crimped to the tube, ensuring a lightweight footprint not designed to be disassembled. It relies on a fixed rubber bumper to soften end-of-stroke impacts rather than an adjustable cushion. Because this specific SKU lacks the -S suffix, it cannot accept a CMSG, DMSG, or EMSG position sensor. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL20X25-CAT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø20 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | — |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 20 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Swings a small guide gate on an electronics assembly line to route printed circuit boards, utilizing the 25 mm stroke and CA pivot to smoothly track the arcing motion of the gate arm.
Pushes lightweight plastic caps out of a machining fixture with 157 N of force at 0.5 MPa, fitting easily within the cramped footprint of a multi-spindle lathe enclosure.
Applies a precise 25 mm clamping stroke to hold a microchip in place during automated optical inspection, where the compact riveted body minimizes overall fixture mass.
If you need less force, the 20 mm bore is the smallest available MBL size, so you must look at smaller alternative mini cylinders. To step up, the 32 mm bore provides 402 N of push force at 0.5 MPa. Choose the MBLC variant if your cycle speed requires an adjustable air cushion rather than the standard fixed rubber bumper. For single-direction spring-return tasks, consider the MSBL or MTBL single-acting models.
This cylinder cannot hold a load if air pressure is lost; the rod will drift or drop when exhausted. The fixed bumper only softens impact and is not a brake. For exact replacement, match the 20 mm bore, 25 mm stroke, G1/8 port (NPT thread form), CA pivot back cover, and no magnet. The Ø8 mm carbon-steel rod with 20 µm chrome plating handles basic loads, but for any arcing motion, pair this CA cover with an SDB pivot bracket to avoid rod bearing side-load wear.
Quick checklist
At 0.5 MPa, the push force is 157 N and the pull force is 132 N. At 0.7 MPa, the push force is 220 N. The maximum theoretical force is 32 kgf at 1.0 MPa.
No, this specific SKU lacks the -S suffix for a built-in magnet, so it cannot be fitted with a CMSG, DMSG, or EMSG sensor switch. You would need the MBL20X25S-CA variant to track rod position.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.