
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL20X250-CAT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 250mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL20X250-CAT is a double-acting aluminum mini round cylinder engineered for tight machine spaces. It delivers 157 N of push force and 132 N of pull force at 0.5 MPa across a 250 mm stroke. The CA pivot back cover allows the body to swing freely on a pin, making it ideal for arcing or angular load applications where a rigid flat-end mount would bind.
This genuine AirTAC unit features a riveted rolling-packed barrel that crimps the covers directly to the tube, ensuring a lightweight, compact footprint that cannot be disassembled like a tie-rod cylinder. A heterogeneous two-way piston seal retains grease for long service life, while the Ø8 mm carbon steel rod is protected with 20 µm hard-chrome plating. Note that this specific SKU lacks a built-in magnet, so it cannot support CMSG, DMSG, or EMSG position sensing. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL20X250-CAT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø20 mm |
| Stroke | 250 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | — |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 20 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Swings a thread guide arm across a 250 mm traversing path using the CA clevis mount, ensuring the delicate yarn lays evenly onto a spinning bobbin without rigid binding.
Pushes lightweight cardboard cartons laterally off a sorting belt, utilizing the 157 N push force and the pivot back cover to smoothly arc the diverter arm out of the lane.
Actuates a 250 mm pivoting flap on a small parts hopper, where the compact 20 mm aluminum body fits within the tight clearance of the bin's sheet metal enclosure.
With a 250 mm stroke on an Ø8 mm rod, this cylinder is highly susceptible to side-load bending; you must use an external guide rail or pair it with the SDB pivot bracket to prevent rod bearing damage. If you need more force, step up to the 32 mm bore (402 N push @0.5 MPa); if you need less, drop down to the 20 mm bore's smaller standard lengths. For faster cycle speeds on this long stroke, consider the MBLC variant which adds an adjustable air cushion instead of the base MBL's fixed rubber bumper. Remember, the rubber bumper only softens end-of-stroke impact—it will not hold the load if air pressure is lost or the valve is centered; use an external pilot-operated check valve if position holding is required.
Quick checklist
This 20 mm bore cylinder has a G1/8 port and an Ø8 mm rod. It generates 157 N push and 132 N pull at 0.5 MPa, 220 N push at 0.7 MPa, and a maximum theoretical force of 32 kgf at 1.0 MPa.
This specific SKU lacks the -S suffix, meaning it has no internal magnet and cannot accept CMSG, DMSG, or EMSG electronic switches. Additionally, the base MBL uses a fixed rubber bumper for end-of-stroke impact absorption; for an adjustable air cushion, you must switch to the MBLC variant.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.