verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart1 Request a QuoteQuote
AirTAC MBL Series · Aluminum-Barrel Mini Cylinder

Airtac MBL Aluminum Alloy Mini Cylinder MBL20X250SCAT

The AirTAC MBL Aluminum Alloy Mini Cylinder MBL20X250SCAT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 250mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.

  • BoreØ20 mm
  • Stroke250 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM8×1.25
  • CushionRubber bumper (MBLC variant: adjustable air cushion)
$36.24 $43.74Save 17% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MBL20 stroke, mounting and version on one page All MBL20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MBL Aluminum Alloy Mini Cylinder MBL20X250SCAT

The AirTAC MBL20X250SCAT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. Generating 157 N of push force at 0.5 MPa, this 20 mm bore, 250 mm stroke unit is built with a riveted rolling-packed barrel that crimps the covers directly to the tube for a lightweight footprint. The CA pivot back cover allows the body to swing on a pin, making it ideal for arcing or angular load applications. A built-in magnet (-S) enables contactless position detection using AirTAC CMSG reed or DMSG/EMSG electronic switches.

This model uses a heterogeneous two-way piston seal that retains grease for long service life, paired with a carbon-steel rod hardened with 20 µm chrome plating for wear resistance. End-of-stroke impact is absorbed by a fixed rubber bumper rather than an adjustable cushion. Note that the narrow Ø8 mm rod and long 250 mm stroke mean this cylinder has low side-load tolerance; an external guide or the MBLD double-rod variant is recommended to prevent rod-bearing bending. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac MBL Aluminum Alloy Mini Cylinder MBL20X250SCAT Technical Specifications

ModelAirtac MBL Aluminum Alloy Mini Cylinder MBL20X250SCAT
SeriesMBL aluminum-barrel mini round cylinder
Bore sizeØ20 mm
Stroke250 mm
Acting typeDouble acting
Port size1/8"
Rod threadM8×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionRubber bumper (MBLC variant: adjustable air cushion)
Max strokeUp to 500 mm

Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa157 N132 N
0.7 MPa220 N—
Max (@1.0 MPa)32 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MBL Aluminum Alloy Mini Cylinder MBL20X250SCAT

MBLAluminum-barrel mini round cylinder, double acting.
20Bore size in mm.
×250Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).

Where the Airtac MBL Aluminum Alloy Mini Cylinder MBL20X250SCAT Is Used

precision_manufacturing

Textile Loom Guide

Drives a thread tensioning arm in a compact weaving loom, utilizing the 157 N push force and CA pivot cover to accommodate the arcing swing of the yarn guide mechanism.

inventory_2

PCB Shuttle Pusher

Indexes empty printed circuit board trays into a testing station, where the 250 mm stroke provides the necessary reach and the -S magnet confirms tray transfer via a DMSG sensor.

memory

Chip Ejector Arm

Sweeps finished microchips off a test socket using a 132 N pull force, fitting within the tight clearance of semiconductor handling equipment.

Is the Airtac MBL Aluminum Alloy Mini Cylinder MBL20X250SCAT the Right Cylinder?

This 20 mm bore yields 157 N push and 132 N pull at 0.5 MPa. If your application requires less force, you are at the smallest standard size. If you need more power, step up to the 25 mm bore, which provides 245 N push and 206 N pull at 0.5 MPa. The CA pivot back cover is specifically designed to absorb angular misalignment during arcing movements, unlike the rigid U flat-end default. Replacement parts must match the 20 mm bore, 250 mm stroke, G1/8 port size, NPT thread form, CA pivot cover, and -S magnet configuration.

Because the stroke is 250 mm, the unsupported Ø8 mm piston rod is highly susceptible to side-load bending. Rely on the CA clevis to swing freely or add an external guide rail. The fixed rubber bumper softens end impacts but does not lock the rod—if air pressure drops, the load will drift and requires an external pilot-operated check valve for holding. For faster cycles with heavier loads, consider the MBLC variant with adjustable air cushioning.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB / FA / SDB) and back cover (CA pivot / U flat-end).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MBL Aluminum Alloy Mini Cylinder MBL20X250SCAT FAQ

At 0.5 MPa, the push force is 157 N and the pull force is 132 N. At 0.7 MPa, the push force increases to 220 N. The maximum theoretical force is 32 kgf at 1.0 MPa.

No, the base MBL20X250SCAT uses a fixed rubber bumper to soften end-of-stroke impacts. If your application requires adjustable air cushioning for heavier loads or faster speeds, you must select the MBLC variant.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MBL Cylinders

Request a Quote for Airtac MBL Aluminum Alloy Mini Cylinder MBL20X250SCAT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MBL20X250SCAT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.