verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart1 Request a QuoteQuote
AirTAC MBL Series · Aluminum-Barrel Mini Cylinder

Airtac MBL Aluminum Alloy Mini Cylinder MBL20X250SUT

The AirTAC MBL Aluminum Alloy Mini Cylinder MBL20X250SUT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 250mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.

  • BoreØ20 mm
  • Stroke250 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM8×1.25
  • CushionRubber bumper (MBLC variant: adjustable air cushion)
$36.24 $43.74Save 17% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MBL20 stroke, mounting and version on one page All MBL20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MBL Aluminum Alloy Mini Cylinder MBL20X250SUT

The AirTAC MBL20X250SUT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. Operating on a 20mm bore with a 250mm stroke, it generates 157N of push force and 132N of pull force at 0.5 MPa. The riveted rolling-packed barrel crimps the front and rear covers directly to the tube, yielding a lightweight footprint that is not designed to be disassembled like a tie-rod cylinder. This specific SKU includes a U flat-end back cover for rigid fixed mounting and a built-in magnet (-S) for position detection.

Unlike larger ISO profile cylinders, this non-standardized mini body prioritizes a small footprint over interchangeability. It relies on a fixed rubber bumper to soften end-of-stroke impact rather than an adjustable air cushion. The piston rod is carbon steel with a 20 um hard-chrome plating for wear resistance, paired with a heterogeneous two-way piston seal that retains grease for a long service life. Because it includes the -S suffix, it directly supports AirTAC CMSG (reed) and DMSG or EMSG (solid-state) sensor switches. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac MBL Aluminum Alloy Mini Cylinder MBL20X250SUT Technical Specifications

ModelAirtac MBL Aluminum Alloy Mini Cylinder MBL20X250SUT
SeriesMBL aluminum-barrel mini round cylinder
Bore sizeØ20 mm
Stroke250 mm
Acting typeDouble acting
Port size1/8"
Rod threadM8×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionRubber bumper (MBLC variant: adjustable air cushion)
Max strokeUp to 500 mm

Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa157 N132 N
0.7 MPa220 N—
Max (@1.0 MPa)32 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MBL Aluminum Alloy Mini Cylinder MBL20X250SUT

MBLAluminum-barrel mini round cylinder, double acting.
20Bore size in mm.
×250Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).

Where the Airtac MBL Aluminum Alloy Mini Cylinder MBL20X250SUT Is Used

memory

PCB Depaneling Router

Uses the 250mm stroke to traverse and separate printed circuit boards, relying on the 157N push force and built-in magnet to confirm the blade position.

inventory_2

Small Parts Ejector

Pushes lightweight plastic moldings out of a machining center, where the compact riveted aluminum body fits within the tight machine envelope.

conveyor_belt

Package Diverter Arm

Actuates a lightweight sorting flap on a conveyor line, using the U flat-end back cover for rigid fixed mounting against the frame.

Is the Airtac MBL Aluminum Alloy Mini Cylinder MBL20X250SUT the Right Cylinder?

At 0.5 MPa, this 20mm bore yields 157N push force. If your application requires less force, step down to the neighbouring 16mm bore class (though AirTAC mini rounds start at 20mm, so consider an even smaller body format), or if you need more power, step up to the 25mm bore which provides 245N push at 0.5 MPa. If you need faster cycle times with heavier loads, consider the MBLC variant which features an adjustable air cushion instead of the fixed rubber bumper. If you only need a push or pull action without live air pressure on the return, the MSBL or MTBL single-acting variants save space.

With a 250mm stroke on an Ø8mm rod, the cylinder has low side-load tolerance; long unsupported mini rods bend under side load, so you should use an external guide or a pivot mount. A plain MBL does not hold its position or load when air pressure is lost, exhausted, or the valve is centred, as the rod drifts or drops. The rubber bumper only softens the end-of-stroke impact and is not a lock or brake. If a load must be held without live pressure, use an external rod lock or a pilot-operated check valve. This SKU features a NPT port thread, G1/8 port size, U flat-end back cover, and a built-in magnet.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB / FA / SDB) and back cover (CA pivot / U flat-end).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MBL Aluminum Alloy Mini Cylinder MBL20X250SUT FAQ

This double-acting cylinder has a 20mm bore and a 250mm stroke. At 0.5 MPa it provides 157N push force and 132N pull force. At 0.7 MPa the push force is 220N, and the maximum theoretical force is 32 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa.

The base MBL uses a fixed rubber bumper, not an adjustable air cushion; for adjustable air cushioning, look at the MBLC variant. This specific SKU includes a built-in magnet (-S) so you can mount AirTAC CMSG (reed), DMSG, or EMSG (electronic) sensor switches directly to the body for position detection.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MBL Cylinders

Request a Quote for Airtac MBL Aluminum Alloy Mini Cylinder MBL20X250SUT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MBL20X250SUT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.