verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart1 Request a QuoteQuote
AirTAC MBL Series · Aluminum-Barrel Mini Cylinder

Airtac MBL Aluminum Alloy Mini Cylinder MBL20X250UT

The AirTAC MBL Aluminum Alloy Mini Cylinder MBL20X250UT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 250mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.

  • BoreØ20 mm
  • Stroke250 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM8×1.25
  • CushionRubber bumper (MBLC variant: adjustable air cushion)
$33.83 $41.33Save 18% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MBL20 stroke, mounting and version on one page All MBL20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MBL Aluminum Alloy Mini Cylinder MBL20X250UT

The AirTAC MBL20X250UT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. It features a 20mm bore and a 250mm stroke, generating 157N of push force and 132N of pull force at 0.5 MPa. The U suffix denotes a rigid flat-end rear cover, providing a stable fixed mounting footprint for straightforward linear actuation tasks.

Unlike serviceable tie-rod bodies, this unit utilizes a riveted rolling-packed barrel where the covers are crimped to the tube, optimizing space and minimizing weight. The piston relies on a heterogeneous two-way seal that retains grease for long service life, while the carbon steel rod features 20 um hard-chrome plating to resist wear. Note that this specific SKU lacks a built-in magnet, meaning it cannot accept CMSG, DMSG, or EMSG position sensors. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac MBL Aluminum Alloy Mini Cylinder MBL20X250UT Technical Specifications

ModelAirtac MBL Aluminum Alloy Mini Cylinder MBL20X250UT
SeriesMBL aluminum-barrel mini round cylinder
Bore sizeØ20 mm
Stroke250 mm
Acting typeDouble acting
Port size1/8"
Rod threadM8×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionRubber bumper (MBLC variant: adjustable air cushion)
Max strokeUp to 500 mm

Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa157 N132 N
0.7 MPa220 N—
Max (@1.0 MPa)32 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MBL Aluminum Alloy Mini Cylinder MBL20X250UT

MBLAluminum-barrel mini round cylinder, double acting.
20Bore size in mm.
×250Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).

Where the Airtac MBL Aluminum Alloy Mini Cylinder MBL20X250UT Is Used

memory

PCB Depaneling Ejector

Pushes separated circuit boards out of a routing fixture using 157N of force, fitting easily into dense electronics assembly machinery.

package

Small Carton Flap Folder

Actuates a 250mm stroke arm to fold lightweight corrugated cardboard flaps on a compact packaging line where space is strictly limited.

biotech

Lab Tube Rack Transfer

Slides a microplate or test tube rack between testing stations with a rigid U flat-end mount ensuring stable linear movement.

Is the Airtac MBL Aluminum Alloy Mini Cylinder MBL20X250UT the Right Cylinder?

Selecting the MBL20X250UT provides 157N push force at 0.5 MPa. If your application requires less force, stepping down is not an option as 20mm is the smallest available bore in this series. If you need significantly more power, the neighbouring 25mm bore offers 245N of push force at 0.5 MPa. Because this model uses a fixed rubber bumper rather than an adjustable air cushion, heavy end-of-stroke impacts will occur unless you upgrade to the MBLC variant.

With a 250mm stroke driven by a small Ø8mm rod, side-load tolerance is minimal. An external guide rail is strongly recommended to prevent rod-bearing bending, or you could switch to the MBLD double-rod type for anti-rotation support. Furthermore, this cylinder will not hold its load if air pressure drops; a separate pilot-operated check valve is required for position holding. Replacement specifications: 20mm bore, 250mm stroke, G1/8 port, NPT thread, U flat-end back cover, no magnet.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB / FA / SDB) and back cover (CA pivot / U flat-end).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MBL Aluminum Alloy Mini Cylinder MBL20X250UT FAQ

At 0.5 MPa, this double-acting cylinder provides 157N of push force and 132N of pull force. At 0.7 MPa, the push force increases to 220N, with a theoretical maximum of 32 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa at speeds of 30-800 mm/s.

No, because the MBL20X250UT SKU does not include the -S suffix, it lacks a built-in magnet and cannot host CMSG, DMSG, or EMSG electronic or reed sensor switches. You must select an MBL20X250S variant if rod position detection is required.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MBL Cylinders

Request a Quote for Airtac MBL Aluminum Alloy Mini Cylinder MBL20X250UT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MBL20X250UT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.