verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart1 Request a QuoteQuote
AirTAC MBL Series · Aluminum-Barrel Mini Cylinder

Airtac MBL Aluminum Alloy Mini Cylinder MBL20X25SCAT

The AirTAC MBL Aluminum Alloy Mini Cylinder MBL20X25SCAT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 25mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.

  • BoreØ20 mm
  • Stroke25 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM8×1.25
  • CushionRubber bumper (MBLC variant: adjustable air cushion)
$29.32 $36.82Save 20% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MBL20 stroke, mounting and version on one page All MBL20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MBL Aluminum Alloy Mini Cylinder MBL20X25SCAT

The AirTAC MBL20X25SCAT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. It delivers 157 N of push force and 132 N of pull force at 0.5 MPa, making it suited for short 25 mm linear positioning tasks in small-part automation. This specific SKU includes a CA pivot back cover, allowing the cylinder body to swing on a pin to accommodate arcing or angular loads during motion.

Unlike tie-rod bodies, this unit features a riveted rolling-packed barrel where the covers are crimped to the tube, ensuring a lightweight, non-rebuildable assembly. The rod is carbon steel with 20 µm hard-chrome plating for wear resistance, and a heterogeneous two-way piston seal retains grease for long service life. The built-in magnet (-S) enables position detection using AirTAC CMSG (reed) or DMSG and EMSG (solid-state) sensor switches. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac MBL Aluminum Alloy Mini Cylinder MBL20X25SCAT Technical Specifications

ModelAirtac MBL Aluminum Alloy Mini Cylinder MBL20X25SCAT
SeriesMBL aluminum-barrel mini round cylinder
Bore sizeØ20 mm
Stroke25 mm
Acting typeDouble acting
Port size1/8"
Rod threadM8×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionRubber bumper (MBLC variant: adjustable air cushion)
Max strokeUp to 500 mm

Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa157 N132 N
0.7 MPa220 N—
Max (@1.0 MPa)32 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MBL Aluminum Alloy Mini Cylinder MBL20X25SCAT

MBLAluminum-barrel mini round cylinder, double acting.
20Bore size in mm.
×25Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).

Where the Airtac MBL Aluminum Alloy Mini Cylinder MBL20X25SCAT Is Used

precision_manufacturing

PCB Depaneling Saw Feed

Drives a small circular saw blade 25 mm forward to singulate assembled printed circuit boards, utilizing the 157 N push force and CA pivot to absorb slight blade alignment variance.

memory

Connector Insertion Arm

Pushes ribbon cable IDC connectors into PCB headers during electronics assembly, where the compact 20 mm bore fits between dense vertical tooling.

inventory_2

Carton Flap Diverter

Pivots a small guide flap on a packaging conveyor to sort small cartons, leveraging the CA clevis mount to handle the arcing motion of the actuator rod.

Is the Airtac MBL Aluminum Alloy Mini Cylinder MBL20X25SCAT the Right Cylinder?

At 0.5 MPa, this 20 mm bore generates 157 N push and 132 N pull. If you need less force, there is no smaller MBL bore, so you would look outside the mini round family. If you need more force, step up to the 25 mm bore, which provides 245 N push and 206 N pull. Choose the MBLC variant if your application requires adjustable air cushioning to soften heavier end-of-stroke impacts, as the base MBL relies on a fixed rubber bumper. For single-acting spring-return needs, consider the MSBL or MTBL models.

This CA pivot configuration is ideal when the drive mechanism follows an arc rather than a strictly rigid linear path. Because the base MBL uses a fixed rubber bumper rather than a locking mechanism, the rod will drift or drop if air pressure is lost or the valve is centered; it cannot hold a load without live pressure. To hold a position safely, add an external rod lock or a pilot-operated check valve. Replacement match: 20 mm bore, 25 mm stroke, G1/8 port (NPT thread), CA back cover, S magnet.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB / FA / SDB) and back cover (CA pivot / U flat-end).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MBL Aluminum Alloy Mini Cylinder MBL20X25SCAT FAQ

This 20 mm bore cylinder generates 157 N push and 132 N pull at 0.5 MPa. At 0.7 MPa, the push force increases to 220 N. The maximum theoretical force is 32 kgf at 1.0 MPa, with an operating pressure range of 0.15-1.0 MPa.

The base MBL uses a fixed rubber bumper at the end of the stroke and does not have an adjustable air cushion (you would need the MBLC variant for that). However, this SKU includes a built-in magnet (-S), allowing you to mount AirTAC CMSG reed or DMSG/EMSG electronic sensor switches directly onto the body for position detection.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MBL Cylinders

Request a Quote for Airtac MBL Aluminum Alloy Mini Cylinder MBL20X25SCAT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MBL20X25SCAT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.