
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL20X25SUT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 25mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL20X25SUT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. Operating with a 20mm bore and 25mm stroke, it delivers 157N of push force and 132N of pull force at 0.5 MPa. The riveted rolling-packed barrel crimps the front and rear covers directly to the tube, creating an exceptionally light assembly that is not designed to be disassembled like a traditional tie-rod body.
This specific SKU includes a built-in magnet (-S) for rod position detection using AirTAC CMSG, DMSG, or EMSG sensor switches, and features a U flat-end back cover for rigid fixed mounting. End-of-stroke energy is absorbed by a fixed rubber bumper rather than an adjustable cushion. The carbon-steel piston rod features a 20 um hard-chrome plating, and a heterogeneous two-way piston seal retains grease for extended operational life. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL20X25SUT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø20 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | — |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 20 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Provides 157N of push force at 0.5 MPa to positively eject printed circuit boards from test fixtures without damaging delicate traces.
Executes a fast 25mm stroke to tuck minor flaps on small pharmaceutical cartons, fitting neatly into compact packaging machinery.
Uses the integrated magnet and CMSG sensor to verify the exact extended position when shifting 96-well microplates between analytical stations.
Step down is not available as 20mm is the smallest MBL bore; stepping up to the 25mm bore increases output to 245N push at 0.5 MPa. Choose the MBLC variant if your application requires adjustable air cushioning for heavier moving masses, or select MSBL/MTBL if a single-acting spring-return function is needed. The base MBL does not hold its position when air pressure is lost—the rod will drift—so an external rod lock or pilot-operated check valve is required to suspend a load safely.
Replacement match: 20mm bore, 25mm stroke, G1/8 port, NPT thread form, U flat-end back cover, no mounting accessory specified, with a built-in magnet (-S).
Quick checklist
At 0.5 MPa it provides 157N push and 132N pull. At 0.7 MPa the push force is 220N. The maximum theoretical force is 32 kgf when operated at the 1.0 MPa pressure limit.
No, the base MBL features a fixed rubber bumper to soften end-of-stroke impact, not an adjustable air cushion. You must step up to the MBLC variant to get adjustable cushioning for heavier loads.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.