
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL20X300SCAT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 300mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL20X300SCAT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. Delivering 157 N of push force and 132 N of pull force at 0.5 MPa, this 20 mm bore unit manages a 300 mm stroke while maintaining a small footprint. The riveted rolling-packed aluminum barrel keeps the body light and permanently sealed, though it is not designed to be disassembled like a tie-rod cylinder.
This specific SKU features a built-in magnet (-S) for use with CMSG, DMSG, or EMSG sensor switches, and a CA pivot back cover that swings on a pin to accommodate arcing or angular loads. The carbon-steel piston rod has 20 um hard-chrome plating for wear resistance. End-of-stroke deceleration is handled by a fixed rubber bumper, not an adjustable cushion. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL20X300SCAT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø20 mm |
| Stroke | 300 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | — |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 20 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Actuates a pivoting yarn guide arm across a loom, where the CA pivot back cover accommodates the arcing thread-path motion and the 157 N push force shifts the lightweight guide bracket.
Swings a small pneumatic deflector flap on a packaging conveyor to sort light parcels, using the 300 mm stroke to reach across a 280 mm belt width.
Drives a soft brush across a printed circuit board panel, relying on the -S magnet and a DMSG solid-state sensor to verify the 300 mm extension stroke completed before brushing retracts.
For lighter duty, the MBL16 bore offers a smaller footprint, while stepping up to the MBL25 bore provides 245 N push force at 0.5 MPa for heavier workpieces. Choose the MBLC variant if your cycle speed requires adjustable air cushioning, or the MSBL/MTBL single-acting models for spring-return tasks. A plain MBL does not hold its load if air pressure is lost or the valve is centered; use an external pilot-operated check valve for position holding.
When replacing this part, match the 20 mm bore, 300 mm stroke, G1/8 port, NPT thread form, CA pivot back cover, and the -S magnet. Because the 300 mm stroke creates high leverage on the small Ø8 mm rod, side-load tolerance is low. The CA pivot cover helps absorb angular stress, but for rigid radial loads over this long travel, use an external guide rail or the MBLD double-rod cylinder to prevent rod-bearing bending.
Quick checklist
At 0.5 MPa, this 20 mm bore cylinder provides 157 N push force and 132 N pull force. At 0.7 MPa, the push force is 220 N, and it reaches a maximum theoretical force of 32 kgf at 1.0 MPa.
No, the base MBL uses a fixed rubber bumper to soften the end-of-stroke impact. If your application requires adjustable air cushioning to handle faster or heavier moving masses, you must upgrade to the MBLC variant.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.