verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart1 Request a QuoteQuote
AirTAC MBL Series · Aluminum-Barrel Mini Cylinder

Airtac MBL Aluminum Alloy Mini Cylinder MBL20X300SUT

The AirTAC MBL Aluminum Alloy Mini Cylinder MBL20X300SUT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 300mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.

  • BoreØ20 mm
  • Stroke300 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM8×1.25
  • CushionRubber bumper (MBLC variant: adjustable air cushion)
$37.78 $45.28Save 16% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MBL20 stroke, mounting and version on one page All MBL20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MBL Aluminum Alloy Mini Cylinder MBL20X300SUT

The AirTAC MBL20X300SUT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. Operating at 0.5 MPa, it provides 157 N of push force and 132 N of pull force, making it suitable for light-duty positioning tasks over its 300 mm stroke. This configuration includes a built-in magnet (-S) for non-contact position detection via CMSG, DMSG, or EMSG sensor switches, and a U flat-end back cover for rigid rear mounting.\n\nUnlike ISO tie-rod cylinders, this unit features a riveted rolling-packed barrel where the covers are crimped to the tube, ensuring a lightweight, compact footprint that is not designed to be disassembled. It relies on a fixed rubber bumper to soften end-of-stroke impacts rather than an adjustable air cushion. The piston rod is carbon steel with 20 µm hard-chrome plating, paired with a heterogeneous two-way piston seal that retains grease for extended operational life. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac MBL Aluminum Alloy Mini Cylinder MBL20X300SUT Technical Specifications

ModelAirtac MBL Aluminum Alloy Mini Cylinder MBL20X300SUT
SeriesMBL aluminum-barrel mini round cylinder
Bore sizeØ20 mm
Stroke300 mm
Acting typeDouble acting
Port size1/8"
Rod threadM8×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionRubber bumper (MBLC variant: adjustable air cushion)
Max strokeUp to 500 mm

Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa157 N132 N
0.7 MPa220 N—
Max (@1.0 MPa)32 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MBL Aluminum Alloy Mini Cylinder MBL20X300SUT

MBLAluminum-barrel mini round cylinder, double acting.
20Bore size in mm.
×300Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).

Where the Airtac MBL Aluminum Alloy Mini Cylinder MBL20X300SUT Is Used

memory

PCB Shuttle Conveyor

Drives a 300 mm linear shuttle for bare PCB boards between SMT inspection lanes, using the 157 N push force to move lightweight trays without stressing the aluminum frame.

inventory_2

Small Parts Ejector

Pushes small injection-molded plastic caps out of a machining center over a 300 mm travel, relying on the built-in magnet to confirm ejection before the next cycle.

biotech

Sample Tube Dispenser

Actuates a 300 mm travel pick-and-place head for blood sample tubes in a diagnostic analyzer, fitting into the machine's narrow chassis where larger cylinders cannot.

Is the Airtac MBL Aluminum Alloy Mini Cylinder MBL20X300SUT the Right Cylinder?

With a 300 mm stroke on an Ø8 mm rod, this cylinder has low side-load tolerance; long unsupported mini rods are prone to bending under lateral forces. To manage this, use an external guide rail, switch to a CA pivot back cover for arcing loads, or select the MBLD double-rod type to prevent rotation. If your application requires adjustable end-position cushioning for heavier moving masses, step up to the MBLC variant.\n\nFor sizing, stepping down is not an option as this is the smallest MBL bore; to step up, the next size is the 25 mm bore, which yields 245 N push at 0.5 MPa. If you need the rod to hold its position when air pressure is lost or the valve is centered, note that the rubber bumper is not a lock or brake—you will need an external rod lock or a pilot-operated check valve. This SKU uses a G1/8 port, NPT thread form, and a U flat-end back cover.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB / FA / SDB) and back cover (CA pivot / U flat-end).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MBL Aluminum Alloy Mini Cylinder MBL20X300SUT FAQ

This 20 mm bore cylinder delivers 157 N push and 132 N pull at 0.5 MPa, 220 N push at 0.7 MPa, and a maximum theoretical force of 32 kgf at 1.0 MPa. It operates at a speed range of 30-800 mm/s.

No, the base MBL features a fixed rubber bumper to soften end-stop impact, not an adjustable cushion screw. If you need adjustable air cushioning for faster or heavier loads, you must select the MBLC variant.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MBL Cylinders

Request a Quote for Airtac MBL Aluminum Alloy Mini Cylinder MBL20X300SUT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MBL20X300SUT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.