
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL20X300UT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 300mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL20X300UT is a double-acting aluminum mini round cylinder engineered for tight machine spaces. It delivers 157 N of push force and 132 N of pull force at 0.5 MPa, making it suitable for lightweight positioning tasks across a 300 mm stroke. The U suffix designates a rigid flat-end rear cover for direct foot mounting. Because this SKU lacks the -S magnet option, it cannot accept a CMSG, DMSG, or EMSG position sensor switch.
Inside the riveted rolling-packed barrel, a heterogeneous two-way piston seal retains grease for long service life, while the Ø8 mm carbon-steel piston rod features 20 µm hard-chrome plating to resist wear and corrosion. The compact body is crimped rather than tie-rod assembled, prioritizing a small footprint over field-rebuildability. End-of-stroke energy is absorbed by a fixed rubber bumper rather than an adjustable air cushion. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL20X300UT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø20 mm |
| Stroke | 300 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | — |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 20 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Pushes a routing gate across a 300 mm path in dense electronics assembly lines, using the compact 20 mm body to fit between adjacent conveyor belts.
Extends to shift a lightweight semiconductor wafer cassette between processing stations where the 157 N push force is sufficient for low-mass handling.
Actuates a diverter arm on a packaging machine, utilizing the rigid U flat-end rear cover to maintain alignment while cycling lightweight cartons.
Selecting the MBL20X300UT provides a 300 mm stroke in the smallest MBL footprint. If you need less force, stepping down is not an option as 20 mm is the minimum bore. If your application requires more thrust, step up to the 25 mm bore, which provides 245 N of push force at 0.5 MPa. For higher cycling speeds with heavier loads, consider the MBLC variant, which replaces the fixed rubber bumper with an adjustable air cushion.
A 300 mm stroke on an Ø8 mm rod creates a high rod-to-side-load ratio; long unsupported mini rods bend easily under lateral stress. Use an external guide rail, pair the cylinder with a pivot bracket, or switch to the MBLD double-rod anti-rotation type. Note that a plain MBL does not hold its position when air pressure is lost or the valve is centered—the rod drifts. Use an external rod lock or pilot-operated check valve if gravity or load demands position holding without live pressure. Replacement match: 20 mm bore, 300 mm stroke, G1/8 port, NPT thread, U flat-end back cover, no magnet.
Quick checklist
At 0.5 MPa it provides 157 N push and 132 N pull. At 0.7 MPa the push force is 220 N. The theoretical maximum force is 32 kgf at 1.0 MPa. The operational speed ranges from 30-800 mm/s.
No. Because this SKU lacks the -S suffix, it has no internal magnet and cannot accept CMSG, DMSG, or EMSG sensor switches. Additionally, the base MBL uses a fixed rubber bumper to soften end-of-stroke impact; you must upgrade to the MBLC variant to get adjustable air cushioning.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.