verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC MBL Series · Aluminum-Barrel Mini Cylinder

Airtac MBL Aluminum Alloy Mini Cylinder MBL20X30SCAT

The AirTAC MBL Aluminum Alloy Mini Cylinder MBL20X30SCAT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 30mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.

  • BoreØ20 mm
  • Stroke30 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM8×1.25
  • CushionRubber bumper (MBLC variant: adjustable air cushion)
$30.20 $37.70Save 19% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MBL20 stroke, mounting and version on one page All MBL20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MBL Aluminum Alloy Mini Cylinder MBL20X30SCAT

The AirTAC MBL20X30SCAT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. Generating 157 N of push force at 0.5 MPa, this 20 mm bore, 30 mm stroke unit is built for light-duty positioning. Its riveted rolling-packed barrel permanently crimps the covers to the tube, yielding a lightweight footprint that is not designed to be disassembled like a tie-rod body.

This specific SKU includes a built-in magnet (-S) for rod position detection via CMSG reed or DMSG/EMSG electronic switches. It also features a CA pivot back cover, allowing the cylinder to swing on a pin to accommodate arcing or angular loads. The Ø8 mm carbon-steel rod is plated with 20 µm of hard chrome to resist wear and corrosion, while the heterogeneous two-way piston seal retains grease for a long service life. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac MBL Aluminum Alloy Mini Cylinder MBL20X30SCAT Technical Specifications

ModelAirtac MBL Aluminum Alloy Mini Cylinder MBL20X30SCAT
SeriesMBL aluminum-barrel mini round cylinder
Bore sizeØ20 mm
Stroke30 mm
Acting typeDouble acting
Port size1/8"
Rod threadM8×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionRubber bumper (MBLC variant: adjustable air cushion)
Max strokeUp to 500 mm

Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa157 N132 N
0.7 MPa220 N—
Max (@1.0 MPa)32 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MBL Aluminum Alloy Mini Cylinder MBL20X30SCAT

MBLAluminum-barrel mini round cylinder, double acting.
20Bore size in mm.
×30Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).

Where the Airtac MBL Aluminum Alloy Mini Cylinder MBL20X30SCAT Is Used

memory

PCB Edge Guide

Pushes lightweight printed circuit boards into edge clamps during automated optical inspection with 157 N of precise force.

biotech

Vial Sorting Gate

Acts as a compact diverter arm on a 30 mm stroke to route small pharmaceutical vials down the correct packaging lane.

conveyor_belt

Pouch End-Seal Tension

Maintains light, consistent tension on thin film pouches feeding into a rotary sealing jaw using its CA pivot to follow web weave.

Is the Airtac MBL Aluminum Alloy Mini Cylinder MBL20X30SCAT the Right Cylinder?

At 157 N push at 0.5 MPa, this bore is the smallest in the range; stepping up to the 25 mm bore yields 245 N if your application needs more force. If your motion control requires end-of-stroke deceleration rather than the standard fixed rubber bumper, select the MBLC variant for its adjustable air cushion. Note that a plain MBL cannot hold a load if air pressure is lost—the rod will drift—so use an external rod lock for safety-critical holding. Replacement match: 20 mm bore, 30 mm stroke, G1/8 port, NPT thread, CA pivot back cover, with -S magnet.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB / FA / SDB) and back cover (CA pivot / U flat-end).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MBL Aluminum Alloy Mini Cylinder MBL20X30SCAT FAQ

At 0.5 MPa it provides 157 N push and 132 N pull. At 0.7 MPa the push increases to 220 N, and the theoretical maximum force is 32 kgf at 1.0 MPa.

No, the base MBL uses a fixed rubber bumper to soften end-of-stroke impact, not an adjustable cushion screw. You must step up to the MBLC variant for adjustable air cushioning.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MBL Cylinders

Request a Quote for Airtac MBL Aluminum Alloy Mini Cylinder MBL20X30SCAT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MBL20X30SCAT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.