verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart1 Request a QuoteQuote
AirTAC MBL Series · Aluminum-Barrel Mini Cylinder

Airtac MBL Aluminum Alloy Mini Cylinder MBL20X350SCAT

The AirTAC MBL Aluminum Alloy Mini Cylinder MBL20X350SCAT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 350mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.

  • BoreØ20 mm
  • Stroke350 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM8×1.25
  • CushionRubber bumper (MBLC variant: adjustable air cushion)
$39.26 $46.76Save 16% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MBL20 stroke, mounting and version on one page All MBL20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MBL Aluminum Alloy Mini Cylinder MBL20X350SCAT

The AirTAC MBL20X350SCAT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. It delivers 157 N of push force and 132 N of pull force at 0.5 MPa, making it suited for light-duty positioning tasks over its 350 mm stroke. The riveted rolling-packed barrel design keeps the body light and small, though it is not designed to be disassembled and rebuilt like a tie-rod cylinder. A heterogeneous two-way piston seal retains grease internally for long service life.

This specific SKU includes a built-in magnet (-S) for use with AirTAC CMSG, DMSG, and EMSG sensor switches to detect rod position, and features a CA pivot (clevis) back cover. The CA clevis allows the cylinder body to swing on a pin, accommodating arcing or angular loads during movement. It uses a G1/8 port and an Ø8 mm carbon-steel piston rod plated with 20 µm hard chrome for wear and corrosion resistance. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac MBL Aluminum Alloy Mini Cylinder MBL20X350SCAT Technical Specifications

ModelAirtac MBL Aluminum Alloy Mini Cylinder MBL20X350SCAT
SeriesMBL aluminum-barrel mini round cylinder
Bore sizeØ20 mm
Stroke350 mm
Acting typeDouble acting
Port size1/8"
Rod threadM8×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionRubber bumper (MBLC variant: adjustable air cushion)
Max strokeUp to 500 mm

Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa157 N132 N
0.7 MPa220 N—
Max (@1.0 MPa)32 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MBL Aluminum Alloy Mini Cylinder MBL20X350SCAT

MBLAluminum-barrel mini round cylinder, double acting.
20Bore size in mm.
×350Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).

Where the Airtac MBL Aluminum Alloy Mini Cylinder MBL20X350SCAT Is Used

precision_manufacturing

Textile Loom Guide

Actuates a thread tensioning arm over a 350 mm travel arc, where the CA pivot back cover accommodates the lateral swing without binding the small Ø8 mm rod.

inventory_2

Packaging Flap Folder

Pushes lightweight cardboard carton flaps during case erecting, using the 157 N push force at 0.5 MPa and the -S magnet to confirm flap closure.

conveyor_belt

Sorter Diverter Arm

Drives a small routing gate on a conveyor line, relying on the CMSG sensor switch for position feedback and the compact riveted aluminum body for tight frame clearance.

Is the Airtac MBL Aluminum Alloy Mini Cylinder MBL20X350SCAT the Right Cylinder?

With a 350 mm stroke on an Ø8 mm rod, this mini cylinder has low side-load tolerance; an external guide or the CA pivot back cover is essential to prevent rod-bearing bending under lateral stress. You could also consider the MBLD double-rod type for anti-rotation needs. If you need to step down, the MBL20 is the smallest bore available. If you need more force, step up to the MBL25, which provides 245 N push at 0.5 MPa. For faster or heavier moves requiring end-deceleration, select the MBLC variant, which adds an adjustable air cushion instead of the base MBL's fixed rubber bumper.

Note that the fixed rubber bumper softens end-of-stroke impact but is not a lock; this cylinder will not hold a load if air pressure is lost or exhausted. Use an external rod lock or pilot-operated check valve for position holding. Replacement match: 20 mm bore, 350 mm stroke, G1/8 port, NPT thread, CA pivot back cover, built-in magnet.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB / FA / SDB) and back cover (CA pivot / U flat-end).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MBL Aluminum Alloy Mini Cylinder MBL20X350SCAT FAQ

At 0.5 MPa, this double-acting cylinder provides 157 N push and 132 N pull force. At 0.7 MPa, push increases to 220 N, with a maximum theoretical force of 32 kgf at 1.0 MPa. It operates at a speed range of 30-800 mm/s.

No, the base MBL uses a fixed rubber bumper to soften end-of-stroke impact, not an adjustable air cushion. If your 350 mm stroke application requires adjustable end-deceleration for heavier loads, you should select the MBLC variant. Additionally, the bumper is not a lock and cannot hold the load if air pressure is lost.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MBL Cylinders

Request a Quote for Airtac MBL Aluminum Alloy Mini Cylinder MBL20X350SCAT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MBL20X350SCAT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.