
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL20X350SUT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 350mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL20X350SUT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. With a 20mm bore and 350mm stroke, it generates 157N of push force and 132N of pull force at 0.5 MPa. The riveted rolling-packed barrel crimps the front and rear covers directly to the tube, creating an exceptionally light assembly that is not designed to be disassembled or rebuilt like a traditional tie-rod cylinder.
This specific SKU includes a built-in magnet (-S) for use with AirTAC CMSG reed or DMSG and EMSG electronic sensor switches to verify rod position. It features a U flat-end back cover for rigid mounting and a NPT tapered port thread. The carbon-steel piston rod has 20μm hard-chrome plating for wear resistance, paired with a heterogeneous two-way piston seal that retains grease for long service life.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL20X350SUT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø20 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | — |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 20 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Drives a 350mm travel axis on a pick-and-place head for electronic board assembly, using the 157N force to push lightweight actuators into position.
Extends a 350mm routing flap inside a compact conveyor diverter, relying on the lightweight aluminum body to fit within tight machinery guarding.
Pushes sample racks out of a centrifuge loading bay over a long 350mm path, using the -S magnet to trigger a DMSG sensor when the rack clears.
The 20mm bore provides 157N push force at 0.5 MPa; stepping up to the 25mm bore yields 245N for heavier moves, while dropping down is not an option as this is the smallest available MBL size. For applications needing end-of-stroke deceleration for faster cycles, consider the MBLC variant with adjustable air cushions instead of this model's fixed rubber bumper. The base MBL does not hold its load when air pressure is lost or the valve is centered, so an external rod lock or pilot-operated check valve is required for fail-safe position holding.
With a 350mm stroke, the 8mm rod is highly susceptible to bending under side loads. To prevent rod-bearing damage, use an external guide rail, pair the cylinder with a pivot bracket, or switch to the MBLD double-rod anti-rotation cylinder. Replacement match: 20mm bore, 350mm stroke, G1/8 port, NPT thread, U flat-end back cover, built-in magnet.
Quick checklist
At 0.5 MPa it provides 157N push and 132N pull. At 0.7 MPa the push force is 220N, and the maximum theoretical force is 32 kgf at 1.0 MPa.
No, the base MBL20X350SUT uses a fixed rubber bumper to soften end-of-stroke impact, not an adjustable air cushion. For adjustable end-cushioning, select the MBLC variant.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.