
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL20X350UT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 350mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL20X350UT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. Operating at 0.15-1.0 MPa, it generates 157 N of push force and 132 N of pull force at 0.5 MPa. The 350 mm stroke makes it suitable for extended reach tasks where footprint minimization is critical. This genuine AirTAC unit features a U flat-end back cover for rigid, fixed mounting.
Unlike tie-rod cylinders, the MBL body uses a riveted rolling-packed aluminum barrel where the covers are crimped to the tube, ensuring a lightweight but non-rebuildable construction. It relies on a fixed rubber bumper to soften end-of-stroke impacts rather than an adjustable air cushion. Because this specific SKU lacks the -S suffix, it cannot be fitted with a CMSG, DMSG, or EMSG position sensor. The Ø8 mm carbon steel piston rod features 20 µm hard-chrome plating for wear resistance, paired with a heterogeneous two-way piston seal that retains grease for long service life. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL20X350UT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø20 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | — |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 20 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Drives extended 350 mm travel arms to align printed circuit boards into etching chambers, utilizing the compact 20 mm bore to fit within dense electronics manufacturing equipment.
Pushes light-load wafer cassettes out of a loading dock, where the 157 N push force at 0.5 MPa is sufficient and the rigid U flat-end mount ensures stable straight-line ejection.
Extends 350 mm to knock lightweight plastic injection-molded components out of mold cavities into a sorting bin, benefiting from the 30-800 mm/s speed range for rapid cycling.
At 0.5 MPa, this 20 mm bore provides 157 N push and 132 N pull. If you need less force, there is no smaller MBL bore, so you would look outside the series. If your application requires more power, step up to the 25 mm bore, which yields 245 N push and 206 N pull at the same pressure. For faster or heavier cycling that needs end-stroke deceleration, select the MBLC variant with its adjustable air cushion instead of the fixed rubber bumper found here. If you only need spring-extend or spring-retract motion, consider the MSBL or MTBL single-acting alternatives (available in 20-40 mm bores).
With a 350 mm stroke driven by an Ø8 mm rod, the cylinder has low side-load tolerance. Long unsupported mini rods bend under lateral stress, so an external guide rail, a CA pivot back cover, or the MBLD double-rod anti-rotation type is highly recommended to prevent premature seal wear. Additionally, the fixed rubber bumper only softens end-of-stroke impact; it does not hold the load. If air pressure drops or the valve is centered, the rod will drift or drop, requiring an external rod lock or pilot-operated check valve for secure position holding. Replacement match: 20 mm bore, 350 mm stroke, G1/8 port, NPT thread, U flat-end back cover, no magnet.
Quick checklist
At 0.5 MPa, the push force is 157 N and the pull force is 132 N. At 0.7 MPa, the push force increases to 220 N. The maximum theoretical force is 32 kgf when operating at the 1.0 MPa pressure limit.
The base MBL20X350UT uses a fixed rubber bumper to absorb end-of-stroke impact; it does not have an adjustable cushion screw (for adjustable air cushioning, you need the MBLC variant). Additionally, because this SKU lacks the -S suffix for a built-in magnet, it cannot accept any CMSG, DMSG, or EMSG electronic or reed position sensors.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.