
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL20X400-CAT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 400mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL20X400-CAT is a compact double-acting aluminum mini round cylinder engineered for tight machine envelopes where larger profile bodies cannot fit. Operating at 0.15-1.0 MPa, it generates 157 N of push force and 132 N of pull force at 0.5 MPa. The 400 mm stroke is fully standard (max 500 mm) and the CA pivot back cover allows the body to swing on a pin, making it ideal for arcing or angular load paths. As a genuine AirTAC component, it features a riveted rolling-packed barrel that crimps the covers to the tube for minimal weight.
This specific SKU lacks the -S suffix, meaning it has no built-in magnet and cannot accept a CMSG, DMSG, or EMSG position sensor. The Ø8 mm carbon steel piston rod features 20 µm hard-chrome plating for wear resistance, paired with a heterogeneous two-way piston seal that retains grease for long service life. Instead of an adjustable cushion screw, the base MBL relies on a fixed rubber bumper to soften end-of-stroke impacts. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL20X400-CAT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø20 mm |
| Stroke | 400 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | — |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 20 | Bore size in mm. |
| ×400 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Pivots a thread guide arm across a 400 mm path on a weaving loom. The CA clevis accommodates the angular sweep while the 157 N push force at 0.5 MPa shifts the lightweight guide without stalling the high-speed operation.
Folds secondary carton flaps on a compact packaging line. The mini aluminum body fits within the narrow machine frame, and the 400 mm stroke reaches across the conveyor to tuck the flaps before sealing.
Swings a diverter blade to route small plastic bottles on a conveyor. The CA pivot back cover self-aligns the blade under uneven side-loading, while the double-acting design ensures positive retraction against residual belt drag.
With a 157 N push force at 0.5 MPa, stepping down is not an option as 20 mm is the smallest MBL bore. If your application needs more force, step up to the 25 mm bore, which provides 245 N of push force at 0.5 MPa. If arcing motion is unnecessary, the U flat-end back cover provides a rigid fixed rear mount. Because this is a 400 mm stroke on an Ø8 mm rod, the unsupported length is highly susceptible to bending under side-load—use an external guide, the CA pivot to self-align, or switch to an MBLD double-rod cylinder to prevent rod bearing wear.
This MBL20X400-CAT configuration uses a G1/8 port with default NPT tapered thread, an M8x1.25 rod-end, and a CA pivot back cover. Note that the fixed rubber bumper only absorbs end-of-stroke impact; it does not hold the load. If air pressure is lost or the valve is centered, the rod will drift and drop. Use an external rod lock or pilot-operated check valve if the load must be held in place without live pressure.
Quick checklist
At 0.5 MPa, the 20 mm bore provides 157 N of push force and 132 N of pull force. At 0.7 MPa, the push force increases to 220 N, with a maximum theoretical force of 32 kgf at 1.0 MPa. The double-acting speed range is 30-800 mm/s.
No. The base MBL uses a fixed rubber bumper to soften end-of-stroke impact and cannot be adjusted (choose the MBLC variant for adjustable air cushion). Additionally, this SKU lacks the -S suffix, so it has no internal magnet and cannot host CMSG, DMSG, or EMSG sensor switches.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.