
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL20X400SUT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 400mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL20X400SUT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. At 20mm bore, it generates 157N push and 132N pull force at 0.5MPa, making it suitable for lightweight 400mm linear traversing tasks. This genuine AirTAC unit includes a built-in magnet (-S) for non-contact position detection using CMSG reed or DMSG/EMSG solid-state sensor switches.
Unlike tie-rod bodies, this cylinder uses a riveted rolling-packed aluminum barrel that crimps the front and rear covers to the tube for minimal weight. The carbon-steel piston rod features 20µm hard-chrome plating for wear resistance, while the heterogeneous two-way piston seal retains grease for extended operational life. The rear U flat-end cover provides a rigid fixed mounting base. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL20X400SUT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø20 mm |
| Stroke | 400 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | — |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 20 | Bore size in mm. |
| ×400 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Moves lightweight electronic component trays across a 400mm path in semiconductor assembly machinery, utilizing the 157N push force and CMSG reed sensor for stroke confirmation.
Actuates a folding mechanism on a small carton erector, where the compact 20mm bore fits within tight tooling clearances and the 400mm reach clears the packaging web.
Indexes sample racks in diagnostic analyzers over a 400mm travel distance, relying on the DMSG solid-state switch for precise positioning without physical stops.
For slightly lower force, stepping down to the 16mm bore (if available) reduces footprint, while stepping up to the 25mm bore yields 245N push at 0.5MPa for heavier loads. The U flat-end back cover suits rigid straight-line pushes, whereas a CA pivot cover would better accommodate arcing loads. If end-of-stroke energy is too high for the fixed rubber bumper, upgrade to the MBLC variant for adjustable air cushioning.
With a 400mm stroke on an 8mm rod, side-load tolerance is minimal; an external guide or a dual-rod MBLD type is highly recommended to prevent rod-bearing bending. This plain double-acting MBL does not hold its load when air pressure drops or the valve centers, so fit an external rod lock or pilot-operated check valve if gravity or drift must be prevented. Replacement match: 20mm bore, 400mm stroke, G1/8 port, NPT thread, U back cover, with -S magnet.
Quick checklist
At 0.5MPa, the 20mm bore provides 157N push and 132N pull force; at 0.7MPa, push increases to 220N. The maximum theoretical force is 32kgf at 1.0MPa. It operates at a speed of 30-800mm/s.
No, the base MBL20X400SUT uses a fixed rubber bumper to soften end-of-stroke impact and is not adjustable. If your application requires adjustable air cushioning for heavier loads, select the MBLC variant.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.