
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL20X40CAT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 40mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL20X40CAT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. With a 20mm bore and 40mm stroke, it provides 157N of push force and 132N of pull force at 0.5 MPa. The CA pivot back cover allows the cylinder body to swing freely on a pin, making it ideal for arcing or angular load applications where a rigid flat-end mount would bind.
Unlike tie-rod cylinders that can be unbolted and rebuilt, this body uses a riveted rolling-packed construction for minimal weight and footprint. Internal longevity is ensured by a heterogeneous two-way piston seal that retains grease, while the Ø8mm carbon-steel piston rod features 20µm hard-chrome plating for wear resistance. Because this specific SKU lacks the -S suffix, it has no built-in magnet and cannot accept a CMSG, DMSG, or EMSG position sensor switch. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL20X40CAT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø20 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | — |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 20 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Swings a lightweight deflector flap at 157N push force to sort small cartons on a tight-packaging conveyor where a larger ISO cylinder would protrude into the walkway.
Pivots a small gate to halt printed circuit boards on a wave soldering line; the CA clevis accommodates the slight angular arc as the gate opens and closes.
Pushes a 40mm stroke pin to redirect empty glass vials into a filling carousel, using the compact 20mm bore to fit between dense machine guarding.
To size this actuator, step down is not an option as 20mm is the smallest MBL bore. If you need more power, the next size up is the 25mm bore, which raises push force to 245N at 0.5 MPa. If your cycle requires end-position cushioning to absorb heavy moving masses, select the MBLC variant instead, as the base MBL uses a fixed rubber bumper. For applications needing spring-return fail-safe behavior, consider the MSBL or MTBL single-acting series.
Since this SKU features a CA pivot back cover, pair it with an SDB pivot bracket or a clevis knuckle. Note that this cylinder does not hold its load if air pressure drops or the valve is centered; the rod will drift. Use an external pilot-operated check valve if position holding is critical. This model uses a G1/8 port and an M8x1.25 rod-end thread.
Quick checklist
At 0.5 MPa, the 20mm bore yields 157N push and 132N pull. At 0.7 MPa, push increases to 220N. The maximum theoretical force is 32 kgf at 1.0 MPa.
No. The base MBL20X40CAT uses a fixed rubber bumper to soften end impacts, not an adjustable air cushion screw. For adjustable cushioning, you must use the MBLC variant.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.