verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart1 Request a QuoteQuote
AirTAC MBL Series · Aluminum-Barrel Mini Cylinder

Airtac MBL Aluminum Alloy Mini Cylinder MBL20X40SCAT

The AirTAC MBL Aluminum Alloy Mini Cylinder MBL20X40SCAT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 40mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.

  • BoreØ20 mm
  • Stroke40 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM8×1.25
  • CushionRubber bumper (MBLC variant: adjustable air cushion)
$30.20 $37.70Save 19% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MBL20 stroke, mounting and version on one page All MBL20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MBL Aluminum Alloy Mini Cylinder MBL20X40SCAT

The AirTAC MBL20X40SCAT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. Operating at 0.5 MPa, it delivers 157 N of push force and 132 N of pull force over a 40 mm stroke. The riveted rolling-packed barrel design keeps the body exceptionally light and small, firmly establishing it as a non-ISO 6432 alternative for footprint-driven assemblies. This specific SKU includes a built-in magnet (-S) for rod position detection.

Because this configuration uses the CA pivot back cover, the cylinder body swings freely on a pin to accommodate arcing or angular loads. It pairs seamlessly with an SDB pivot bracket. The Ø8 mm carbon-steel piston rod features 20 µm hard-chrome plating for wear resistance, while a heterogeneous two-way piston seal retains grease for a long, maintenance-free service life. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac MBL Aluminum Alloy Mini Cylinder MBL20X40SCAT Technical Specifications

ModelAirtac MBL Aluminum Alloy Mini Cylinder MBL20X40SCAT
SeriesMBL aluminum-barrel mini round cylinder
Bore sizeØ20 mm
Stroke40 mm
Acting typeDouble acting
Port size1/8"
Rod threadM8×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionRubber bumper (MBLC variant: adjustable air cushion)
Max strokeUp to 500 mm

Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa157 N132 N
0.7 MPa220 N—
Max (@1.0 MPa)32 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MBL Aluminum Alloy Mini Cylinder MBL20X40SCAT

MBLAluminum-barrel mini round cylinder, double acting.
20Bore size in mm.
×40Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).

Where the Airtac MBL Aluminum Alloy Mini Cylinder MBL20X40SCAT Is Used

precision_manufacturing

PCB Pick-and-Place Gate

Actuates a lightweight routing gate in a PCB assembly line, where the 157 N push force at 0.5 MPa easily moves the mechanism and the CA pivot absorbs minor angular misalignment.

memory

Connector Insertion Arm

Drives a low-friction arm pressing wire harness connectors into sockets, utilizing the 40 mm stroke and the -S magnet to confirm proper insertion via a DMSG solid-state sensor.

inventory_2

Carton Flap Diverter

Pivots a small guide flap on a packaging conveyor to sort small cartons, relying on the compact riveted aluminum body to fit within the tight conveyor frame clearances.

Is the Airtac MBL Aluminum Alloy Mini Cylinder MBL20X40SCAT the Right Cylinder?

Select this 20 mm bore when your application requires approximately 157 N of push force at 0.5 MPa in a compact footprint. If you need less force, step down is not possible as this is the smallest MBL size. If you need more force, step up to the 25 mm bore, which provides 245 N of push force at 0.5 MPa. The G1/8 port and M8x1.25 rod thread are fixed by the 20 mm bore. This SKU includes the -S magnet for use with CMSG, DMSG, or EMSG sensor switches, and uses the CA pivot back cover with default NPT thread.

The base MBL uses a fixed rubber bumper to soften end-of-stroke impacts; it is not an adjustable air cushion. If your payload requires deceleration control, consider the MBLC variant. Note that a plain MBL cannot hold a load when air pressure is lost—the bumper is not a locking mechanism. Use an external rod lock or pilot-operated check valve if position holding is required.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB / FA / SDB) and back cover (CA pivot / U flat-end).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MBL Aluminum Alloy Mini Cylinder MBL20X40SCAT FAQ

At 0.5 MPa, this 20 mm bore cylinder provides 157 N of push force and 132 N of pull force. At 0.7 MPa, the push force increases to 220 N. The theoretical maximum force is 32 kgf at 1.0 MPa. It operates at pressures from 0.15-1.0 MPa with a speed range of 30-800 mm/s.

This model features a fixed rubber bumper that softens the end-of-stroke impact; it does not have an adjustable air cushion (for that, choose the MBLC variant). However, because it includes the -S magnet, you can mount AirTAC CMSG (reed) or DMSG/EMSG (electronic) sensor switches directly onto the body to detect rod position.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MBL Cylinders

Request a Quote for Airtac MBL Aluminum Alloy Mini Cylinder MBL20X40SCAT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MBL20X40SCAT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.