verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC MBL Series · Aluminum-Barrel Mini Cylinder

Airtac MBL Aluminum Alloy Mini Cylinder MBL20X450SUT

The AirTAC MBL Aluminum Alloy Mini Cylinder MBL20X450SUT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 450mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.

  • BoreØ20 mm
  • Stroke450 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM8×1.25
  • CushionRubber bumper (MBLC variant: adjustable air cushion)
$42.63 $50.13Save 14% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MBL20 stroke, mounting and version on one page All MBL20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MBL Aluminum Alloy Mini Cylinder MBL20X450SUT

The AirTAC MBL20X450SUT is a double-acting aluminum mini round cylinder engineered for tight machine spaces. At 0.5 MPa it provides 157 N of push force and 132 N of pull force, driving a 450 mm stroke via a G1/8 port. This SKU includes the U flat-end back cover for rigid fixed mounting and a built-in magnet (-S) for precise end-position detection using CMSG, DMSG, or EMSG sensor switches.

Unlike tie-rod bodies, the MBL series features a riveted rolling-packed barrel where the covers are crimped to the tube, yielding a lighter footprint not designed for field disassembly. The carbon-steel piston rod carries a 20 µm hard-chrome plating to resist wear, paired with a heterogeneous two-way piston seal that retains grease for a long service life. Impact at the stroke ends is absorbed by a fixed rubber bumper rather than an adjustable cushion. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac MBL Aluminum Alloy Mini Cylinder MBL20X450SUT Technical Specifications

ModelAirtac MBL Aluminum Alloy Mini Cylinder MBL20X450SUT
SeriesMBL aluminum-barrel mini round cylinder
Bore sizeØ20 mm
Stroke450 mm
Acting typeDouble acting
Port size1/8"
Rod threadM8×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionRubber bumper (MBLC variant: adjustable air cushion)
Max strokeUp to 500 mm

Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa157 N132 N
0.7 MPa220 N—
Max (@1.0 MPa)32 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MBL Aluminum Alloy Mini Cylinder MBL20X450SUT

MBLAluminum-barrel mini round cylinder, double acting.
20Bore size in mm.
×450Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).

Where the Airtac MBL Aluminum Alloy Mini Cylinder MBL20X450SUT Is Used

precision_manufacturing

PCB Edge Reject Gate

Actuates a lightweight diverter arm to eject defective printed circuit boards from a conveyor line, using the 450 mm stroke to clear the belt path entirely.

inventory_2

Carton Label Applicator

Extends a pneumatic label wipe-down brush across a packaging station, relying on the 157 N push force to maintain consistent contact without crushing the box.

memory

Wafer Cassette Pusher

Advances a 25-wafer cassette into a loading dock in semiconductor fabrication, where the compact riveted body fits within strict cleanroom tooling envelopes.

Is the Airtac MBL Aluminum Alloy Mini Cylinder MBL20X450SUT the Right Cylinder?

This 20 mm bore yields 157 N push at 0.5 MPa; if your payload is lighter, step down is not an option as this is the smallest MBL size. If you need more force, the 25 mm bore offers 245 N push at 0.5 MPa. For higher kinetic energy at end-of-stroke, consider the MBLC variant which replaces the fixed rubber bumper with an adjustable air cushion. Remember that a plain MBL does not hold its load when air pressure is lost or exhausted—the rod will drift, so an external rod lock or pilot-operated check valve is required for fail-safe holding.

Because the 450 mm stroke is substantial for an Ø8 mm rod, side-load tolerance is minimal and the rod bearing is prone to bending under lateral forces. You must support the load with an external guide rail, or switch to the MBLD double-rod type for anti-rotation. Replacement exact-match specifications: 20 mm bore, 450 mm stroke, G1/8 port, NPT thread, U flat-end back cover, LB/FA/SDB mounting accessory, and -S magnet.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB / FA / SDB) and back cover (CA pivot / U flat-end).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MBL Aluminum Alloy Mini Cylinder MBL20X450SUT FAQ

At 0.5 MPa, this 20 mm bore cylinder outputs 157 N push and 132 N pull force. At 0.7 MPa, the push force increases to 220 N, with a theoretical maximum of 32 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.

No, the base MBL20X450SUT uses a fixed rubber bumper to absorb end-of-stroke impact and cannot be adjusted. If your application requires tunable deceleration for heavier loads, you must upgrade to the MBLC variant which features an adjustable air cushion.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MBL Cylinders

Request a Quote for Airtac MBL Aluminum Alloy Mini Cylinder MBL20X450SUT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MBL20X450SUT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.