verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart1 Request a QuoteQuote
AirTAC MBL Series · Aluminum-Barrel Mini Cylinder

Airtac MBL Aluminum Alloy Mini Cylinder MBL20X50-CAT

The AirTAC MBL Aluminum Alloy Mini Cylinder MBL20X50-CAT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 50mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.

  • BoreØ20 mm
  • Stroke50 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM8×1.25
  • CushionRubber bumper (MBLC variant: adjustable air cushion)
$27.85 $35.35Save 21% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MBL20 stroke, mounting and version on one page All MBL20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MBL Aluminum Alloy Mini Cylinder MBL20X50-CAT

The AirTAC MBL20X50-CAT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. It delivers a push force of 157 N and a pull force of 132 N at 0.5 MPa, making it well-suited for short 50 mm stroke movements in confined assemblies. The riveted rolling-packed barrel keeps the body light and small, though it is not designed to be disassembled like a traditional tie-rod body.

This specific SKU features a CA pivot (clevis) back cover that allows the cylinder to swing on a pin, accommodating arcing or angular loads. It uses a fixed rubber bumper to soften end-of-stroke impact rather than an adjustable air cushion. Because this configuration lacks the -S suffix, it cannot accept a CMSG, DMSG, or EMSG sensor switch for rod position detection. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac MBL Aluminum Alloy Mini Cylinder MBL20X50-CAT Technical Specifications

ModelAirtac MBL Aluminum Alloy Mini Cylinder MBL20X50-CAT
SeriesMBL aluminum-barrel mini round cylinder
Bore sizeØ20 mm
Stroke50 mm
Acting typeDouble acting
Port size1/8"
Rod threadM8×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionRubber bumper (MBLC variant: adjustable air cushion)
Max strokeUp to 500 mm

Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa157 N132 N
0.7 MPa220 N—
Max (@1.0 MPa)32 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MBL Aluminum Alloy Mini Cylinder MBL20X50-CAT

MBLAluminum-barrel mini round cylinder, double acting.
20Bore size in mm.
×50Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).

Where the Airtac MBL Aluminum Alloy Mini Cylinder MBL20X50-CAT Is Used

memory

PCB Ejection Arm

Provides the precise 50 mm stroke and 157 N push to eject populated printed circuit boards from a testing fixture without damaging delicate traces.

inventory_2

Pouch Forming Guide

Swings on its CA pivot bracket to guide packaging film into a vertical pouch sealing jaw, utilizing the compact 20 mm body to fit within narrow machine guarding.

biotech

Sample Tube Sorting

Actuates a low-friction routing gate for clinical sample tubes, relying on the 132 N pull force at 0.5 MPa to reliably retract the diverter arm.

Is the Airtac MBL Aluminum Alloy Mini Cylinder MBL20X50-CAT the Right Cylinder?

Choose this 20 mm bore when you need 157 N of push force at 0.5 MPa in a very compact footprint. If your application requires less force, there is no smaller bore in the MBL line, so you would need to look outside the mini round family. If you need more power, stepping up to the 25 mm bore increases your push force to 245 N. For applications needing end-of-stroke deceleration for heavier moving loads, consider the MBLC variant which adds an adjustable air cushion. If you need the rod to stay put after a loss of air pressure, this cylinder will drift or drop, so an external rod lock or pilot-operated check valve is required. This SKU uses a G1/8 port, NPT thread form, M8x1.25 rod-end thread, and the CA pivot back cover.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB / FA / SDB) and back cover (CA pivot / U flat-end).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MBL Aluminum Alloy Mini Cylinder MBL20X50-CAT FAQ

At 0.5 MPa, this 20 mm bore cylinder provides 157 N of push force and 132 N of pull force. At 0.7 MPa, the push force increases to 220 N, with a theoretical maximum force of 32 kgf at 1.0 MPa. It operates at a speed range of 30-800 mm/s.

No, this specific SKU lacks the -S magnet suffix, meaning it cannot accept CMSG, DMSG, or EMSG sensor switches. Additionally, the base MBL uses a fixed rubber bumper to absorb end-of-stroke impact. If you need adjustable air cushioning, you must step up to the MBLC variant.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MBL Cylinders

Request a Quote for Airtac MBL Aluminum Alloy Mini Cylinder MBL20X50-CAT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MBL20X50-CAT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.