
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL20X500-CAT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 500mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL20X500-CAT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. Operating at 0.5 MPa, it provides 157 N of push force and 132 N of pull force, making it suited for light-duty positioning tasks. The 500 mm stroke represents the maximum standard extension for this bore size, allowing deep linear reach without requiring a larger body.
This specific SKU features a CA pivot (clevis) back cover that swings on a pin to accommodate arcing or angular loads during motion. Because it lacks the -S suffix, a position sensor cannot be fitted. The riveted rolling-packed barrel construction keeps the body light and compact, while the heterogeneous two-way piston seal retains grease for extended operational life. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL20X500-CAT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø20 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | — |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 20 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Guides yarn carriers through long weaving paths; the 500 mm stroke and 157 N push force handle light tensioning across the loom frame.
Swings lightweight sorting gates on packaging lines; the CA clevis absorbs the pivoting arc while the compact body fits between conveyor belts.
Positions thin circuit boards along a long inspection track; the 132 N pull force retracts the guide safely without damaging fragile components.
To size this actuator, consider stepping down to the bore 25 variant if you need higher force, as it delivers 245 N push at 0.5 MPa compared to this 20 mm bore's 157 N. If your application requires even less force, note that 20 mm is the smallest available MBL size. For end-of-stroke energy dissipation, the base MBL uses a fixed rubber bumper; if your process demands adjustable air cushioning for heavier impacts, select the MBLC variant instead.
At a 500 mm stroke, the Ø8 mm piston rod is highly susceptible to bending under side loads. To prevent rod-bearing damage, guide the load externally or rely on the CA pivot back cover to absorb angular misalignment. Keep in mind that a plain MBL cannot hold a load if air pressure is lost or exhausted—the rod will drift. Use an external pilot-operated check valve or rod lock if position retention is required.
Quick checklist
At 0.5 MPa, the push force is 157 N and the pull force is 132 N. At 0.7 MPa, the push force reaches 220 N. The maximum theoretical force is 32 kgf at 1.0 MPa.
No, because this SKU lacks the -S suffix, it has no built-in magnet and cannot support CMSG, DMSG, or EMSG sensor switches. You would need an MBL20X500S-CA model for position detection.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.